Journal Papers

1. Hill, C.A.S.; Khalil, H.P.S.A.,(2000), Effect of Fiber Treatments on Mechanical Properties of Coir or Oil Palm Fiber Reinforced Polyester Composites,Journal Of Applied Polymer Science,78,(9),1685-1697


2. Rozman, H.D; Lai, C.Y; Ismail, H; Ishak Z.A.M.,(2000), The Effect of Coupling Agents on The Mechanical and Physical Properties of Oil Palm Empty Fruit Bunch-Polypropylene Composites,Polymer International,49,(11),1273-1278


3. Hill, C.A.S.; Khalil, H.P.S.A.,(2000),The Effect Of Environmental Exposure Upon The Mechanical Properties of Coir or Oil Palm Fiber Reinforced Composites,Journal Of Applied Polymer Science,77,(6),1322-1330


4. Rozman, H.D; Tan, K.W; Kumar, R.N;Abu Bakar A.;Ishak Z.A.M.;Ismail H.,(2000), The Effect Of Lignin As A Compatibilizer on The Physical Properties of Coconut Fiber-Polypropylene Composites,European Polymer Journal,36,(7),1483-1494


5. Ismail, H; Jaffri, R.M; Rozman, H.D.,(2000), Oil Palm Wood Flour Filled Natural Rubber Composites: Fatigue and Hysteresis Behaviour,Polymer International,49,(6),618-622


6. Ishak, Z.A.M; Ishiaku, U.S; Karger-Kocsis, J.,(2000), Hygrothermal Aging and Fracture Behavior of Short-Glass-Fiber-Reinforced Rubber-Toughened Poly(Butylene Terephthalate) Composites,Composites Science And Technology,60,(6),803-815


7. Rozman, H.D; Lee, M.H; Kumar, R.N;Abusamah A.;Ishak Z.A.M.,(2000,) The Effect of Chemical Modification Of Rice Husk With Glycidyl Methacrylate on The Mechanical and Physical Properties of Rice Husk-Polystyrene Composites,Journal Of Wood Chemistry And Technology,20,(1),93-109


8. Ismail, H; Hasliza, I.N; Ishiaku, U.S.,(2000),The Effect of Oil Palm Wood Flour As A Filler In Natural Rubber Compounds,Kautschuk Gummi Kunststoffe,53,(1-2),24-29


9. Ishak, Z.A.M; Mansor, T.S.A.T; Yow, B.N;Ishiaku U.S.Karger-Kocsis J.,(2000),Short Glass Fibre Reinforced Poly(Butylene Terephthalate) - Part 1 - Microstructural Characterisation and Kinetics of Moisture Absorption,Plastics Rubber And Composites,29,(6),263-270


10. Khalil, H.P.S.A.; Rozman, H.D; Ahmad, M.N; Ismail H.,(2000), Acetylated Plant-Fiber-Reinforced Polyester Composites: A Study of Mechanical, Hygrothermal, and Aging Characteristics,Polymer-Plastics Technology And Engineering,39,(4),757-781


11. Mariatti, M; Nasir, M; Ismail, H.,(2000), Effect of Sample Cutting Direction on Mechanical Properties of Woven Thermoplastic Prepreg,Polymer Testing,19,(6),617-624

1. Ismail, H; Edyham, M.R; Wirjosentono, B., (2001),Dynamic Properties and Swelling Behaviour of Bamboo Filled Natural Rubber Composites: The Effect of Bonding Agent,Iranian Polymer Journal,10,(6),377-383

2. Rozman, H.D; Tay, G.S; Abubakar, A.; Kumar, R.N.,(2001), Tensile Properties of Oil Palm Empty Fruit Bunch-Polyurethane Composites,European Polymer Journal,37,(9),1759-1765

3. Rozman, H.D; Tan, K.W; Kumar, R.N;,(2001),Preliminary Studies on The Use Of Modified Alcell Lignin As A Coupling Agent in The Biofiber Composites,Journal Of Applied Polymer Science,81,(6),1333-1340

4. Ishak, Z.A.M.; Ariffin, A; Senawi, R.,(2001), Effects of Hygrothermal Aging and a Silane Coupling Agent on The Tensile Properties of Injection Molded Short Glass Fiber Reinforced Poly(Butylene Terephthalate) Composites,European Polymer Journal,37,(8),1635-1647

5. Ishak, Z.A.M.; Yow, B.N.; Ng, B.L;Khalili H.P.S.A.;Rozman H.D.,(2001), Hygrothermal Aging And Tensile Behavior of Injection-Molded Rice Husk-Filled Polypropylene Composites,Journal Of Applied Polymer Science,81,(3),742-753

6. Mariatti, M; Nasir, M; Ismail, H.,(2001), The Flexural Behavior Of Woven Prepreg Thermoplastic Composites the Flexural Behavior of Woven Prepreg Thermoplastic Composites,Journal Of Thermoplastic Composite Materials,14,(4),290-305

7. Rozman, H.D; Tay, G.S; Kumar, R.N;Abusamah A.;Ismail H.;Ishak Z..A.M.,(2001), Polypropylene-Oil Palm Empty Fruit Bunch-Glass Fibre Hybrid Composites: A Preliminary Study on the Flexural and Tensile Properties,European Polymer Journal,37,(6),1283-1291

8. Siriwardena, S;Ismail, H; Ishiaku, U.S.,(2001), A Comparison of White Rice Husk Ash and Silica As Fillers in Ethylene-Propylene-Diene Terpolymer Vulcanizates,Polymer International,50,(6),707-713

9. Khalil, H.P.S.A.; Ismail, H; Rozman, H.D; Ahmad M.N.,(2001), The Effect of Acetylation on Interfacial Shear Strength Between Plant Fibres and Various Matrices,European Polymer Journal.37,(5),1037-1045

10. Rozman, H.D; Tan, K.W; Kumar, R.N;Abu Bakar A.,(2001), The Effect of Hexamethylene Diisocyanate Modified Alcell Lignin As A Coupling Agent on The Flexural Properties of Oil Palm Empty Fruit Bunch - Polypropylene Composites,Polymer International,50,(5),561-567

11. Ismail, H; Mega, L; Khalil, H.P.S.A.,(2001),Effect Of A Silane Coupling Agent on the Properties of White Rice Husk Ash-Polypropylene/Natural Rubber Composites,Polymer International,50,(5),606-611

12. Khalil, H.P.S.A.; Ismail, H; Ahmad, M.N; Ariffin A.Hassan K.,(2001),The Effect of Various Anhydride Modifications on Mechanical Properties and Water Absorption Of Oil Palm Empty Fruit Bunches Reinforced Polyester Composites,Polymer International,50,(4),395-402

13. Danjaji, I.D; Nawang, R; Ishiaku, U.S;Ismail H.;Ishak Z.A.M.,(2001), Sago Starch-Filled Linear Low-Density Polyethylene (Lldpe) Films: Their Mechanical Properties And Water Absorption,Journal Of Applied Polymer Science,79,(1),29-37

14. Ismail, H.,(2001), The Potential Of Rubberwood As A Filler In Epoxidized Natural Rubber Compounds,Journal Of Elastomers And Plastics,33,(1),34-46

15. Abu Bakar, A; Jones, F.R.,(2001), Evaluation of Micromechanical Properties of Advanced Polymer Composites,Plastics Rubber And Composites,30,(1),30-33

16. Sharma, N; Chang, L.P; Chu, Y.L;Ismail H.;Ishiaku U.S.;Ishak Z.A.M.,(2001), A Study on the Effect of Pro-Oxidant on The Thermo-Oxidative Degradation Behaviour of Sago Starch Filled Polyethylene,Polymer Degradation And Stability,71,(3),381-393

17. Rozman, H.D; Tay, G.S; Kumar, R.N;Abusamah A.; Ismail H.;Ishak Z.A.M.(2001), The Effect of Oil Extraction of The Oil Palm Empty Fruit Bunch on The Mechanical Properties of Polypropylene-Oil Palm Empty Fruit Bunch-Glass Fibre Hybrid Composites,Polymer-Plastics Technology And Engineering,40,(2),103-115

18. Khalil, H.P.S.A.; Chow, W.C; Rozman, H.D;Ismail H.;Ahmad M.N Kumar R.N.,(2001), The Effect of Anhydride Modification of Sago Starch on the Tensile And Water Absorption Properties Of Sago-Filled Linear Low-Density Polyethylene (LLDPE),Polymer-Plastics Technology And Engineering,40,(3),249-263

19. Ismail, H; Mega, L.(2001), The Effects Of A Compatibilizer And A Silane Coupling Agent on the Mechanical Properties of White Rice Husk Ash Filled Polypropylene/Natural Rubber Blend,Polymer-Plastics Technology And Engineering,40,(4),463-478

20. Siriwardena, S; Ismail, H; Ishiaku, U.S.,(2001), White Rice Husk Ash Filled Ethylene-Propylene-Diene Terpolymer/Polypropylene Blends: Effect of Dynamic Vulcanization and Filler Loading,Polymer-Plastics Technology And Engineering,40,(4),519-538

21. Khalil, H.P.S.A.; Ismail, H.,(2001), Effect of Acetylation and Coupling Agent Treatments Upon Biological Degradation of Plant Fibre Reinforced Polyester Composites,Polymer Testing,20,(1),65-75

22. Siriwardena, S; Ismail, H; Ishiaku, U.S.,(2001), Effect of Mixing Sequence in the Preparation of White Rice Husk Ash Filled Polypropylene/Ethylene-Propylene-Diene Monomer Blend,Polymer Testing,20,(1),105-11

23. Ismail, H; Nizam, J.M; Khalil, H.P.S.A.,(2001), The Effect of A Compatibilizer on The Mechanical Properties and Mass Swell of White Rice Husk Ash Filled Natural Rubber/Linear Low Density Polyethylene Blends,Polymer Testing,20,(2),125-133

24. Nawang, R; Danjaji, I.D; Ishiaku, U.S;Ismail H.;Ishak Z.A.M.,(2001),Mechanical Properties of Sago Starch-Filled Linear Low Density Polyethylene (LLDPE) composites,Polymer Testing,20,(2),167-172

25. Mariatti, M; Nasir, M; Ismail, H.,(2001), The Effects of Hole Locations And Hole Sizes on Damaged Behaviour of Woven Thermoplastic Composites,Polymer Testing,20,(2),179-189
1. Mariatti, M; Nasir, M; Ismail, H.,(2002), Determination of The Influence of Stacking Structure, Float Length And Pressure Time On The Flexural Properties of Satin Laminated Composite Using A Factorial Design,Polymer Testing,21,(7),807-814 Article Number: PII S0142-9418(02)00015-6

2. Premalal, H.G.B.; Ismail, H; Baharin, A.,(2002), Comparison of The Mechanical Properties of Rice Husk Powder Filled Polypropylene Composites With Talc Filled Polypropylene Composites,Polymer Testing,21,(7),833-839 Article Number: PII S0142-9418(02)00018-

3. Siriwardena, S; Ismail, H; Ishiaku, U.S; Pepera M.C.S.,(2002), Mechanical and Morphological Properties of White Rice Husk Ash Filled Polypropylene/Ethylene-Propylene-Diene Terpolymer Thermoplastic Elastomer Composites,Journal Of Applied Polymer Science,85,(2),438-453 Published: JUL 11 2002

4. Yow, B.N; Ishiaku, U.S; Ishak, Z.A.M.;Karger-Kocsis J.,(2002), Fracture Behavior of Rubber-Modified Injection Molded Poly(Butylene Terephthalate) with and Without Short Glass Fiber Reinforcement,Journal Of Applied Polymer Science,84,(6),1233-1244

5. Ismail, H; Edyham, MR; Wirjosentono, B.,(2002), Bamboo Fibre Filled Natural Rubber Composites: The Effects Of Filler Loading And Bonding Agent,Polymer Testing,21,(2),139-144

6. Ishiaku, U.S; Pang, K.W; Lee, W.S;Ishak Z.A.M.,(2002), Mechanical Properties and Enzymic Degradation of Thermoplastic and Granular Sago Starch Filled Poly(Epsilon-Caprolactone),European Polymer Journal,38,(2),393-401

7. Danjaji, I.D; Nawang, R; Ishiaku, U.S;.,(2002), Degradation Studies And Moisture Uptake of Sago-Starch-Filled Linear Low-Density Polyethylene Composites,Polymer Testing,21,(1),75-81

8. Ismail, H; Shuhelmy, S; Edyham, M.R.,(2002), The Effects of a Silane Coupling Agent on Curing Characteristics and Mechanical Properties of Bamboo Fibre Filled Natural Rubber Composites,European Polymer Journal,38,(1),39-47

9. Mariatti, M; Nasir, M; Ismail, H.,(2002), Effect of Prepreg Geometry on The Prepreg and Plain Weave Composite Properties,Journal Of Reinforced Plastics And Composites,21,(8),711-722

10. Ismail, H; Hong, H.B; Ping, C.Y;Khalil H.P.S.A.,(2002), The Effects of A Compatibilizer on The Properties of Polypropylene/Silica/White Rice Husk Ash Hybrid Composites,Journal Of Reinforced Plastics And Composites,21,(18),1685-1696

11. Siriwardena, S; Ismail, H; Ishiaku, U.S.,(2002),Mechanical Properties and Recyclability of Thermoplastic Elastomer Composites of White Rice Husk Ash-Ethylene/Propylene/Diene Terpolymer-Polypropylene,Conference: International Conference on Materials For Advanced Technologies (ICMAT2001) Location: SINGAPORE, SINGAPORE Date: JUL 01-06,2001 Sponsor(s): Mat Res Soc,Plastics Rubber And Composites,31,(4),167-176

12. Siriwardena, S; Ismail, H; Ishiaku, U.S.,(2002), Water Absorption Behavior and Its Effect on Tensile Properties of Ethylene-Propylene-Diene-Terpolymer/Polypropylene/Filler Ternary Composites: A Preliminary Study,Polymer-Plastics Technology And Engineering,41,(3),419-433

13. Khalil, H.P.S.A.; Rozman, H.D; Ismail, H; Rosfaizal.;Ahmad M.N.,(2002), Polypropylene (PP)-Acacia Mangium Composites: The Effect of Acetylation on Mechanical and Water Absorption Properties,Polymer-Plastics Technology And Engineering,41,(3),453-468
1. Rozman, H.D; Yeo, Y.S; Tay, G.S;Abu Bakar A.,(2003), The Mechanical and Physical Properties of Polyurethane Composites Based on Rice Husk and Polyethylene Glycol,Polymer Testing,22,(6),617-623

2. Mariatti, M; Nasir, M; Ismail, H.,(2003), Effect of stacking structure on the properties of satin laminated composites,Journal Of Thermoplastic Composite Materials,16,(4),303-315

3. Rozman, H.D; Saad, M.J; Ishak, Z.A.M.,(2003), Flexural and Impact Properties of Oil Palm Empty Fruit Bunch (EFB)-Polypropylene Composites - the Effect of Maleic Anhydride Chemical Modification of EFB,Polymer Testing,22,(3),335-341

4. Ismail, H.,(2003), The Effects of Filler Loading and a Silane Coupling Agent On The Dynamic Properties and Swelling Behaviour of Bamboo Filled Natural Rubber Compounds,Journal Of Elastomers And Plastics,35,(2),149-159

5. Ismail, H; Jaffri, R.M; Rozman, H.D.,(2003), The Effects of Filler Loading and Vulcanisation System On Properties Of Oil Palm Wood Flour-Natural Rubber Composites,Journal Of Elastomers And Plastics,35,(2),181-192

6. Lim, J.H; Ratnam, M.M; Khalil, H.P.S.A.,(2003), An Experimental And Finite Element Analysis Of The Static Deformation Of Natural Fiber-Reinforcedcomposite Beam,Polymer Testing,22,(2),169-177 Article Number:PII S0142-9418(02)00066-1

7. Ismail, H; Hong, H.B; Ping, C.Y;Khalil H.P.S.A.,(2003), Polypropylene/Silica/Rice Husk Ash Hybrid Composites: A Study on The Mechanical, Water Absorption and Morphological Properties,Journal Of Thermoplastic Composite Materials,16,(2),121-137

8. Rozman, H.D; Saad, M.J; Ishak, Z.A.M.,(2003), Modification of Oil Palm Empty Fruit Bunches With Maleic Anhydride: The Effect on the Tensile And Dimensional Stability Properties of Empty Fruit Bunch/Polypropylene Composites,Journal Of Applied Polymer Science,87,(5),827-835

9. Siriwardena, S; Ismail, H; Ishiaku, U.S.,(2003), A Comparison of The Mechanical Properties and Water Absorption Behavior of White Rice Husk Ash and Silica Filled Polypropylene Composites,Journal Of Reinforced Plastics And Composites,22,(18),1645-1666

10. Rozman, H.D; Tay, G.S.; Abusamah, A.,(2003), The Effect of Glycol Type, Glycol Mixture, And Isocyanate/Glycol Ratio on Flexural Properties of Oil Palm Empty Fruit Bunch-Polyurethane Composites,Journal Of Wood Chemistry And Technology,23(3-4),249-260
11. Mariatti, M; Nasir, M; Ismail, H.,(2003), Effect of Stacking Sequence on the Properties of Plain-Satin Hybrid Laminate Composites,Polymer-Plastics Technology And Engineering,42,(1),65-79

12. Ismail, H; Mohamad, Z; Bakar, A.A.,(2003), A Comparative Study on Processing, Mechanical Properties, Thermo-Oxidative Aging, Water Absorption, And Morphology of, Rice Husk Powder And Silica Fillers In Polystyrene/Styrene Butadiene Rubber Blends,Polymer-Plastics Technology And Engineering,42,(1),81-103

13. Rozman, H.D; Ang, L.G; Tay, G.S;Abu Bakar A.,(2003), The Mechanical Properties of Rice Husk-Polyurethane Composites,Polymer-Plastics Technology And Engineering,42,(3),327-343

14. Rozman, H.D; Tay, G.S; Abu Bakar, A.,(2003), Oil Palm Empty Fruit Bunch-Polyurethane Composites: The Effect of Isocyanate/Glycol Ratio, Glycol Type, and Glycol Mixture on Impact Strength, Dimensional Stability, And Thermal Properties,Polymer-Plastics Technology And Engineering,42,(5),811-826

15. Premalal, H.G.B.; Ismail, H; Baharin, A.,(2003), Effect of Processing Time on The Tensile, Morphological, and Thermal Properties of Rice Husk Powder-Filled Polypropylene Composites,Polymer-Plastics Technology And Engineering,42,(5),827-851
 1. Teh, P.L; Ishak, Z.A.M; Hashim, A.S;Karger-Kocsis J.;Ishiaku U.S.,(2004), On The Potential of Organoclay With Respect to Conventional Fillers (Carbon Black, Silica) for Epoxidized Natural Rubber Compatibilized Natural Rubber Vulcanizates,Journal Of Applied Polymer Science,94,(6),2438-2445

2. Rozman, HD; Ahmadhilmi, KR; Abubakar, A.,(2004), Polyurethane (PU)-Oil Palm Empty Fruit Bunch (EFB) Composites: The Effect Of EFBG Reinforcement In Mat Form And Isocyanate Treatment On The Mechanical Properties,Polymer Testing,23,(5),559-565

3. Zurina, M; Ismail, H; Bakar, A.A.,(2004), Rice Husk Powder-Filled Polystyrene/Styrene Butadiene Rubber Blends,Journal Of Applied Polymer Science,92,(5),3320-3332

4. Leong, Y.W; Abu Bakar, M.B; Ishak, Z.A.M;Ariffin A.;Pukanszky B.,(2004), Comparison of The Mechanical Properties And Interfacial Interactions Between Talc, Kaolin, and Calcium Carbonate Filled Polypropylene Composites,Journal Of Applied Polymer Science,91,(5),3315-3326

5. Leong, Y.W; Ishak, Z.A.M; Ariffin, A.,(2004), Mechanical and Thermal Properties of Talc And Calcium Carbonate Filled Polypropylene Hybrid Composites,Journal Of Applied Polymer Science,91,(5),3327-3336

6. Leong, Y.W; Abu Bakar, M.B; Ishak, Z.A.M;Ariffin A.,(2004), Characterization of Talc/Calcium Carbonate Filled Polypropylene Hybrid Composites Weathered In A Natural Environment,Polymer Degradation And Stability,83,(3),411-422

7. Ismail, H; Mohamad, Z; Abu Bakar, A.,(2004), The Effect Of Dynamic Vulcanization On Properties Of Rice Husk Powder Filled Polystyrene/Styrene Butadiene Rubber Blends,Iranian Polymer Journal,13,(1),11-19

8. Ismail, H; Suryadiansyah.,(2004), Effects of Filler Loading on Properties of Polypropylene-Natural Rubber-Recycle Rubber Powder (PP-NR-RRP) Composites,Journal Of Reinforced Plastics And Composites,23,(6),639-650

9. Mariatti, M; Nasir, M;Ismail, H; Backlund J.,(2004), Effect of Hole Drilling Techniques on Tensile Properties of Continuous Fiber Impregnated Thermoplastic (COFIT) Plain Weave Composites,Journal Of Reinforced Plastics And Composites,23,(11),1173-1186

10. Zurina, M; Ismail, H; Bakar, A.A.,(2004), Partial Replacement of Silica By Rice Husk Powder In Polystyrene-Styrene Butadiene Rubber Blends,Journal Of Reinforced Plastics And Composites,23,(13),1397-1408

11. Ismail, H; Supri; Yusof, A.M.M.,(2004),properties Of Virgin Poly(Vinylchloride)/Acrylonitrile Butadiene Rubber (Pvcv/Nbr) And Waste Poly(Vinylchloride)/Acrylonitrile Butadiene Rubber (PVCw/NBR) Blends: The Effect of Blend Composition and Dynamic Vulcanization,Polymer-Plastics Technology And Engineering,43,(3),695-711

12. Rozman, H.D; Hazan, A; Abubakar, A.,(2004), Preliminary Study on Mechanical and Dimensional Stability of Rice Husk-Glass Fiber Hybrid Polyester Composites,Polymer-Plastics Technology And Engineering,43,(4),1129-1140

13. Ismail, H; Osman, H; Ariffin, A.,(2004), A Comparative Study On Curing Characteristics, Mechanical Properties, Swelling Behavior, Thermal Stability, and Morphology of Feldspar and Silica in SMR L Vulcanizates,Polymer-Plastics Technology And Engineering,43,(5),1323-1344
1. Yew, G.H; Yusof, A.M.M; Ishak, Z.A.M;Ishiaku U.S.,(2005), Water Absorption And Enzymatic Degradation of Poly(Lactic Acid)/Rice Starch Composites,Polymer Degradation And Stability,90,(3),488-500

2. Chow, WS; Abu Bakar, A; Ishak, Z.A.M.,(2005),Water Absorption and Hygrothermal Aging Study on Organomontmorillonite Reinforced Polyamide 6/Polypropylene Nanocomposites,Journal Of Applied Polymer Science,98,(2),780-790

3. Leong, Y.W; Abu Bakar, M.B; Ishak, Z.A.M.;Ariffin A.,(2005), Effects Of Filler Treatments on The Mechanical, Flow, Thermal, And Morphological Properties of Talc and Calcium Carbonate Filled Polypropylene Hybrid Composites,Journal Of Applied Polymer Science,98,(1),413-426

4. Ismail, H; Rusli, A; Rashid, A.A.,(2005), Maleated Natural Rubber As A Coupling Agent for Paper Sludge Filled Natural Rubber Composites,Polymer Testing,24,(7),856-862

5. Solomon, S; Bakar, A.A; Ishak, Z.A.M.;Ishiaku U.S.,(2005), microstructure and Fracture Behavior of (Co) Injection-Molded Polyamide 6 Composites With Short Glass/Carbon Fiber Hybrid Reinforcement,Journal Of Applied Polymer Science,97,(3),957-967

6. Rozman, H.D; Musa, L; Abubakar, A.,(2005), Rice Husk-Polyester Composites: The Effect of Chemical Modification of Rice Husk on The Mechanical And Dimensional Stability Properties,Journal Of Applied Polymer Science,97,(3),1237-1247

7. Salmah; Ismail, H; Abu Bakar, A.,(2005), A Comparative Study on the Effects of Paper Sludge and Kaolin on Properties of Polypropylene/Ethylene Propylene Diene Terpolymer Composites,Iranian Polymer Journal,14,(8),705-713

8. Lim, K.L.K.; Ishak, Z.A.M; Ishiaku, U.S;Fuad A.M.Y.;Yusof A.H.;Czigany T.;Pukanszky B.;Ogunniyi D.S.,(2005), High-Density Polyethylene/Ultrahigh-Molecular-Weight Polyethylene Blend. I. The Processing, Thermal, and Mechanical Properties,Journal Of Applied Polymer Science,97,(1),413-425

9. Ismail, H; Supri; Yusof, A.M.M.,(2005) Effect of Acrylic Acid on The Properties Of Recycled Poly(Vinyl Chloride)/Acrylonitrile-Butadiene Rubber Blends,Journal Of Applied Polymer Science,96,(6),2181-2191‘

10. La Mantia, F.P; Morreale, M; Ishak, Z.A.M.,(2005), Processing and Mechanical Properties of Organic Filler-Polypropylene Composites,Journal Of Applied Polymer Science,96,(5),1906-1913

11. Sim, L.C; Ramanan, S.R; Ismail, H;Sertharamu K.N.;Goh T.J.,(2005), Thermal Characterization of Al2o3 and Zno Reinforced Silicone Rubber As Thermal Pads for Heat Dissipation Purposes,Thermochimica Acta,430,(1-2),155-165

12. Kumar, R.N; Hee, K.C; Rozman, H.D.,(2005),Photofabrication of Biofiber-Based Polymer Matrix Composites,Journal Of Applied Polymer Science,95,(6),1493-1499

13. Ratnam, M.M; Lim, J.H; Khalil, H.P.S.A.,(2005), Study of Three-Dimensional Deformation of A Pallet Using Phase-Shift Shadow Moire And Finite-Element Analysis,Experimental Mechanics,45,(1),9-17

14. Hariharan, A.B.A; Khalil, H.P.S.A.,(2005), Lignocellulose-Based Hybrid Bilayer Laminatecomposite: Part I - Studies on Tensile And Impact Behavior of Oil Palm Fiber-Glass Fiber-Reinforced Epoxy Resin,Journal Of Composite Materials,39,(8),663-684

15. Ismail, H; Salmah; Bakar, A.A.,(2005),the Effect of Paper Sludge Content and Size on The Properties Of Polypropylene (Pp) - Ethylene Propylene Diene Terpolymer (EPDM) Composites,Journal Of Reinforced Plastics And Composites,24,(2),147-159

16. Mariatti, M; Chum, P.K.,(2005), effect Of Laminate Configuration On The Properties of Glass Fiber-Reinforced Plastics (GFRPs) Mixed Composites,Journal Of Reinforced Plastics And Composites,24,(16),1713-1721

17. Rozman, HD; Musa, L; Abubakar, A.,(2005), The Mechanical and Dimensional Properties of Rice Husk-Unsaturated Polyester Composites,Polymer-Plastics Technology And Engineering,44,(3),489-500

18. Ismail, SH; Abu Bakar, A.,(2005), the Effect of Compatibilizer and Coupling Agent on The Properties of Paper Sludge Filled Polypropylene (Pp)/Ethylene Propylene Diene Terpolymer (EPDM) Composites,Polymer-Plastics Technology And Engineering,44,(5),863-879

19. Ismail, H; Suryadiansyah; Azhari, B.,(2005), The Effect of Ethylene Diamine Dilaurate and Silane Coupling Agent on Cure Characteristics, Mechanical, And Thermal Properties Of Silica-Filled Natural Rubber Composites,Polymer-Plastics Technology And Engineering,44,(8-9),1657-1669

20. Wahit, M.U; Hassan, A; Ishak, Z.A.M;Abu Bakar .A.,(2005),The Effect of Polyethylene-Octene Elastomer on The Morphological and Mechanical Properties of Polyamide 6/Polypropylene Nanocomposites,Polymers & Polymer Composites,13,(8),795-805
1. Taib, R. Mat; Ishak, Z. A. Mohd; Rozman, H. D.;Glasser W,G.,(2006), Effect of Moisture Absorption on The Tensile Properties of Steam-Exploded Acacia Mangium Fiber-Polypropylene Composites,Journal Of Thermoplastic Composite Materials,19,(5),475-489

2. Wahit, M. U.; Hassan, A.; Ishak, Z. A. Mohd;Rahmat A.R.;Abu Bakar A..,(2006), Morphology, Thermal, and Mechanical Behavior of Ethylene Octene Copolymer Toughened Polyamide 6/Polypropylene Nanocomposites,Journal Of Thermoplastic Composite Materials,19,(5),545-567

3. Nurazreena; Hussain, LB; Ismail, H.;Mariatti M.,(2006), Metal Filled High Density Polyethylene Composites - Electrical and Tensile Properties,Journal Of Thermoplastic Composite Materials,19,(4),413-425

4. Lim, K.L.K; Ishak, Z.A.M; Ishiaku, U.S;Fuad A.M.Y.;Yusof A.H.;Czigany T.;Pukanzsky B.;Ogunniyi D.S.,(2006), High Density Polyethylene/Ultra High Molecular Weight Polyethylene Blend. Ii. Effect Of Hydroxyapatite on Processing, Thermal, and Mechanical Properties,Journal Of Applied Polymer Science,100,(I5),3931-3942

5. Kumar, R.N; Po, P.L; Rozman, H.D,(2006), Studies On The Synthesis Of Acrylamidomethyl Cellulose Ester and Its Application In Uv Curable Surface Coatings Induced By Free Radical Photoinitiator. Part 1: Acrylamidomethyl Cellulose Acetate,Carbohydrate Polymers,64,(1),112-126

6. Salmah; Ismail, H; Abu Bakar, A,(2006), effects of Chemical Modification of Paper Sludge Filled Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites,Journal Of Reinforced Plastics And Composites,25,(1),43-58

7. Akil, HM; Lily, N; Abd Razak, J;Ong H.;Ahmad Z.A.,(2006), Effect of Various Coupling Agents on Properties of Alumina-Filled Pp Composites,Journal Of Reinforced Plastics And Composites,25,(7),745-759

8. Khalil, H. P. S. A.; Shahnaz, S. B. Sharifah; Ratnam, M. M.;Ahmad F.;Fuad N.A.N.,(2006), Recycle Polypropylene (RPP) Wood Saw Dust (WSD) Composites - Part 1: The Effect of Different Filler Size and Filler Loading on Mechanical And Water Absorption Properties,Journal Of Reinforced Plastics And Composites,25,(12),1291-1303

9. Eng, K. M.; Mariatti, M.; Wagiman, N. R.;Beh K.S.,(2006), Effect of Different Woven Linear Densities on The Properties Of Polymer Composites,Journal Of Reinforced Plastics And Composites,25,(13),1375-1383

10. Wahit, Mat Uzir; Hassan, Azman; Ishak, Zainal Z.A.M.;Rahmat A.R.;Othman N.,(2006), The Effect of Rubber Type and Rubber Functionality on The Morphological and Mechanical Properties of Rubber-Toughened Polyamide 6/Polypropylene Nanocomposites,Polymer Journal,38,(8),767-780

11. Ismail, H; Awang, M; Hazizan, M.A,(2006), Effect of Waste Tire Dust (WTD) size on The Mechanical And Morphological Properties Of Polypropylene/Waste Tire Dust(PP/WTD) Blends,Polymer-Plastics Technology And Engineering,45,(4),463-468

12. Ismail, H; Rusli, A; Rashid, A.A.,(2006), The effect of filler loading and epoxidation on paper-sludge-filled natural rubber composites,Polymer-Plastics Technology And Engineering,45,(4),519-525

13. Osman, A. F.; Mariatti, M.,(2006), Properties of Aluminum Filled Polypropylene Composites,Polymers & Polymer Composites,14,(6),623-633
1. Rozman, H. D.; Hilme, K. R. Ahmad; Abubakar, A.,(2007),Polyurethane Composites Based on Oil Palm Empty Fruit Bunches: Effect of Isocyanate/Hydroxyl Ratio And Chemical Modification of Empty Fruit Bunches With Toluene Diisocyanate And Hexamethylene Diisocyanate on Mechanical Properties,Journal Of Applied Polymer Science,106,(4),2290-2297

2. Tay, G. S.; Rozman, H. D.,(2007), Chemical Modification Of Oil Palm Empty Fruit Bunch: Determination Of Optimum Condition And Characterization,Journal Of Applied Polymer Science,106,(3),1697-1706

3. Ismail, H.; Munusamy, Y.,(2007), Polyvinyl Chloride/Organoclay Nanocomposites: Effects of Filler Loading and Maleic Anhydride,Journal Of Reinforced Plastics And Composites,26,(16),1681-1694

4. Khalil, H. P. S. Abdul; Issam, A. M.; Shakri, M. T. Ahmad;Suruani R.;Awang A.Y.,(2007), Conventional Agro-Composites from Chemically Modified Fibres,Industrial Crops And Products,26,(3),315-323

5. Tee, D. I.; Mariatti, M.; Azizan, A.;See C.H.;Chong K.F.,(2007), Effect of Silane-Based Coupling Agent on the Properties of silver Nanoparticles Filled Epoxy Composites,Composites Science And Technology,67,(11-12),2584-2591

6. Teh, P. L.; Mariatti, M.; Akil, H. M.;Yeoh C.K.;Seetharamu K.N.;Wagiman A.N.R;Beh K.S.,(2007),The Properties of Epoxy Resin Coated Silica Fillers Composites,Materials Letters,61,(11-12),2156-2158

7. Abu Bakar, M. B.; Leong, Y. W.; Ariffin, A.;Ishak Z.A.M.,(2007), Mechanical, Flow, and Morphological Properties of Talc- and Kaolin-Filled Polypropylene Hybrid Composites,Journal Of Applied Polymer Science,104,(1),434-441

8. Edeerozey, A. M. Mohd; Akil, Hazizan Md; Azhar, A. B.;Ariffin M.Z.,(2007), Chemical Modification Of Kenaf Fibers,Materials Letters,61,(10),2023-2025

9. Ishak, Z. A. Mohd; Leong, Y. W.; Steeg, M.; Kange-Kocsis J.,(2007), Mechanical Properties of Woven Glass Fabric Reinforced In Situ Polymerized Poly(Butylene Terephthalate) Composites,Composites Science And Technology,67,(3-4),390-398

10. Chow, W. S.; Ishak, Z. A. Mohd,(2007), Mechanical, Morphological and Rheological Properties of Polyamide 6/Organo-Montmorillonite Nanocomposites,Express Polymer Letters,1,(2),77-83

11. Chow, W. S.,(2007), Water Absorption Of Epoxy/Glass Fiber/Organo-Montmorillonite Nanocomposites,Express Polymer Letters,1,(2),104-108

12. Khalil, H. P. S. Abdul; Noriman, N. Z.; Ahmad, M. N.;Fuad N.A.N.;Ratnam M.M.,(2007), The Effect of Biological Studies of Polyester Composites Filled Carbon Black And Activated Carbon From Bamboo (Gigantochloa Scortechinii),Polymer Composites,28,(1),6-14

13. Ismail, H.; Rusli, Arjulizan; Azura, A. R.,(2007), study Of Fatigue Life And Filler Interaction Of Paper Sludge Filled Epoxidized Natural Rubber (ENR) and Maleated Natural Rubber (MNR) composites,Journal Of Polymers And The Environment,15,(1),67-74

14. Suryadiansyah; Ismail, H.; Azhari, B.,(2007), Waste Paper Filled Polypropylene Composites: The Comparison Effect of Ethylene Diamine Dilaurate As a New Compatibilizer With Maleic Anhydride Polypropylene,Journal Of Reinforced Plastics And Composites,26,(1),51-67

15. Khalil, H. P. S. Abdul; Hanida, S.; Kang, C. W.;Fuad N.A.N.,(2007), Agro-Hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (Efb)/Glass Hybrid Reinforced Polyester Composites,Journal Of Reinforced Plastics And Composites,26,(2),203-218

16. Khalil, H. P. S. Abdul; Norman, N. Z.; Ahmad, M. N.;Ratnam M.M.;Fuad N.A.N.,(2007), Polyester Composites Filled Carbon Black and Activated Carbon From Bamboo (Gigantochloa Scortechinii): Physical and Mechanical Properties,Journal Of Reinforced Plastics And Composites,26,(3),305-320

17. Solomon, S.; Abu Bakar, A.; Ishak, Z. A. Mohd;Leong Y.W.;Ishiaku U.S.;Hamada H.,(2007), Drop Weight Impact Properties of (Co) Injection Molded Short Glass Fiber/Short Carbon Fiber/Polyamide 6 Hybrid Composites,Journal Of Reinforced Plastics And Composites,26,(4),405-418

18. Leng, P. B.; Akil, Hazizan Md; Lin, Ong Hui.,(2007), Thermal Properties Of Microsilica And Nanosilica Filled Polypropylene Composite With Epoxy as Dispersing Aid,Journal Of Reinforced Plastics And Composites,26,(8),761-770

19. Khalil, H. P. S. Abdul; Kumar, R. N.; Asri, S. M.;Fuad N.A.N.;Ahmad M.N.,(2007), Hybrid Thermoplastic Pre-Preg Oil Palm Frond Fibers (OPF) Reinforced In Polyester Composites,Polymer-Plastics Technology And Engineering,46,(1),43-50

20. Ismail, H.; Sam, S. T.; Noor, A. F. Mohd;Bakar .A.A.,(2007), Properties of Ferrite-Filled Natural Rubber Composites,Polymer-Plastics Technology And Engineering,46,(6),641-650

21. Anuar, J.; Mariatti, M.; Ismail, H.,(2007), Properties of Aluminium and Zinc-Filled Natural Rubber Composites,Polymer-Plastics Technology And Engineering,46,(6),667-674

22. Anuar, J.;Mariatti, M.; Ismail, H.,(2007), study On Tensile, Electrical, and Thermal Properties of Aluminium Particle Filled Natural Rubber (Nr) and Ethylene-Propylene-Diene Terpolymer (EPDM) Composites,Polymer-Plastics Technology And Engineering,46,(10-12),1201-1206

23. Samsudin, M. S. F.; Ishak, Z. A. Mohd; Jikan, S. S.;Ariff Z.M.;Ariffin A.,(2007), Effect of Filler Treatments on Rheological Behavior of Calcium Carbonate and Talc-Filled Polypropylene Hybrid Composites,Journal Of Applied Polymer Science,102,(6),5421-5426
1. Rozman, H. D.; Tay, G. S.,(2008), The Effects of NCO/OH Ratio on Propylene Oxide-Modified Oil Palm Empty Fruit Bunch-Based Polyurethane Composites,Journal Of Applied Polymer Science,110,(6),3647-3654

2. Abu Bakar, M. B.; Leong, Y. W.; Ariffin, A.;Ishak Z.A.M.,(2008), Effect of Chemical Treatments on the Mechanical, Flow, and Morphological Properties of Talc- and Kaolin-filled Polypropylene Hybrid Composites,Journal Of Applied Polymer Science,110,(5),2770-2779

3. Ismail, H.; Haw, F. S.,(2008), Effects of Palm Ash Loading and Maleated Natural Rubber as a Coupling Agent on the Properties of Palm-Ash-Filled Natural Rubber Composites,Journal Of Applied Polymer Science,110,5,2867-2876

4. Khoo, T. S.; Ratnam, M. M.; Shahnaz, S. A. B.;Khalil H.P.S.A.,(2008). Wood Filler-recycled Polypropylene (WF-RPP)Composite Pallet: Study of Fastening Method,Journal Of Reinforced Plastics And Composites,27,(16-17),1723-1731

5. Khoo, T. S.; Ratnam, M. M.; Khalil, H. P. S. Abdul,(2008), Wood Filler(WF)-Recycled Polypropylene (RPP)Composite Pallet: Study of Static Deformation using FEA and Shadow Moire,Journal Of Reinforced Plastics And Composites,27,(16-17),1733-1744

6. Khalil, H. P. S. Abdul; Azura, M. Noorshashillawati; Issam, A. M.;Sais M.R.;Adawi T.O.M.,(2008), Oil Palm Empty Fruit Bunches (OPEFB) Reinforced in New Unsaturated Polyester Composites,Journal Of Reinforced Plastics And Composites,27,(16-17)1817-1826

7. Salmah, H.; Ismail, H.,(2008), The Effect of Filler Loading and Maleated Polypropylene on Properties of Rubberwood Filled Polypropylene/Natural Rubber Composites,Journal Of Reinforced Plastics And Composites,27,(16-17),1867-1876

8. Ismail, H.; Rusli, A.; Azura, A. R.;Ahmad Z.,(2008), The Effect of Partial Replacement of Paper Sludge by Commercial Fillers on Natural Rubber Composites,Journal Of Reinforced Plastics And Composites,27,(16-17),1877-1891

9. Sam, S. T.; Ismail, H.; Fauzi, M. N. Ahmad;Abu Bakar A.,(2008),The Effect of Carbon Black on the Properties of Magnetic Ferrite Filled Natural Rubber Composites,Journal Of Reinforced Plastics And Composites,27,(16-17),1893-1908

10. Azura, A. R.; Ghazali, Suriati; Mariatti, M.,(2008), Effects of the filler loading and aging time on the mechanical and electrical conductivity properties of carbon black filled natural rubber,Journal Of Applied Polymer Science,110,(2),747-752

11. Ardhyananta, Hosta; Wahid, Mohd. Haniff; Sasaki, Masahiro;Agag T.;Kawauchi T;Ismail H.;Takeichi T.,(2008), Performance Enhancement of Polybenzoxazine by Hybridization With Polysiloxane,Polymer,49,21,4585-4591,

12. Rashid, Erfan Suryani Abdul; Ariffin, Kamarshah; Akil, Hazizan Md;Kooi C.C.,(2008), Mechanical and Thermal Properties of Polymer Composites for Electronic Packaging Application,Journal Of Reinforced Plastics And Composites,27,(15),1573-1584

13. Ismail, H.; Kheong, O. W.,(2008), the Effect of Bis-(3-Triethoxysilylpropyl) Tetrasulfide, Si69 on Properties of Recycled Poly (Vinyl Chloride)/Acrylonitrile-Butadiene Rubber/Fly Ash (PVCr/NBR/FA) Composites,Journal Of Reinforced Plastics And Composites,27,(15),1649-1661

14. Suryadiansyah; Ismail, H.; Azhari, B.,(2008), Silica-Filled Polypropylene Composites: the Effect of Ethylene Diamine Dilaurate and Maleic Anhydride Grafted Polypropylene on Mechanical Properties, Water Absorption, Morphology, And Thermal Properties,Polymer Composites,29,(10),1169-1176

15. Ismail, H.; Pasbakhsh, Pooria; Fauzi, M. N. Ahmad;Abu Bakar A.,(2008), morphological, Thermal and Tensile Properties of Halloysite Nanotubes Filled Ethylene Propylene Diene Monomer (EPDM) Nanocomposites,Polymer Testing,27,(7),841-850

16. Kusmono; Ishak, Z. A. Mohd; Chow, W. S.;Takeichi T.;Rochmadi.,(2008),Enhancement of properties of PA6/PP nanocomposites via organic modification and compatibilization,Express Polymer Letters,2,(9),655-664

17. Ismail, Hanafi; Osman, Hakimah; Jaafar, Mariatti,(2008), Hybrid-Filler Filled Polypropylene/(Natural Rubber) Composites: Effects of Natural Weathering on Mechanical and Thermal Properties and Morphology,Journal Of Vinyl & Additive Technology,14,(3),142-151

18. Julkapill, Nurhidayatullaili Muhd; Akil, Hazizan Md,(2008), Degradability of Kenaf Dust-Filled Chitosan Biocomposites,Materials Science & Engineering C-Biomimetic And Supramolecular Systems,28,(7),1100-1111

19. Ariffin, A.; Mansor, A. S.; Jikan, S. S.;Ishak Z.A.M.,(2008), Mechanical, Morphological, And Thermal Properties Of Polypropylene/Kaolin Composite. Part I. The Effects Of Surface-Treated Kaolin And Processing Enhancement,Journal Of Applied Polymer Science,108,(6),3901-3916

20. Lee, S. C.; Mariatti, M.,(2008), The Effect of Bagasse Fibers Obtained (From Rind and Pith Component) on The Properties of Unsaturated Polyester Composites,Materials Letters,62,(16),2253-2256

21. Lai, W. L.; Mariatti, M.,(2008), The Properties of Woven Betel Palm (Areca Catechu) Reinforced Polyester Composites,Journal Of Reinforced Plastics And Composites,27,(9),925-935

22. Shyang, Chow Wen; Khim, Loo Yok; Ariffin, Azlan;Arifin Z.;Ishak M.,(2008), Flexural Properties of Hydroxyapatite Reinforced Poly(Methyl Methacrylate) Composites,Journal Of Reinforced Plastics And Composites,27,(9),945-952

23. Mariatti, M.; Jannah, M.; Abu Bakar, A.;Khalil H.P.S.A.,(2008),Properties of Banana and Pandanus Woven Fabric Reinforced Unsaturated Polyester Composites,Journal Of Composite Material,42,(9),931-941

24. Tay, G. S.; Rozman, H. D.,(2008), Swelling Properties of Chemically Modified Oil Palm Empty Fruit Bunch Based Polyurethane Composites,Journal Of Applied Polymer Science,108,(2),995-1004

25. Ismail, H.; Awang, M.,(2008), Natural Weathering of Polypropylene and Waste Tire Dust (PP/WTD) Blends,Journal Of Polymers And The Environment,16,(2),147-153

26. Teh, P. L.; Jaafar, M.; Akil, H. M.;Seerharamu K.N.;Wagiman A.N.R.;Beh K.S.,(2008), Thermal and Mechanical Properties of Particulate Fillers Filled Epoxy Composites for Electronic Packaging Application,Polymers For Advanced Technologies,19,(4),308-315

27. Vilay, V.; Mariatti, M.; Taib, R. Mat;Todo M.,(2008), Effect Of Fiber Surface Treatment and Fiber Loading on The Properties of Bagasse Fiber-Reinforced Unsaturated Polyester Composites,Composites Science And Technology,68,(3-4),631-638

28. Hanim, H.; Fuad, M. Y. Ahmad; Zarina, R.;Ishak Z.A.M.;Hassan A.,(2008), Properties and Structure Of Polypropylene/Polyethylene-Octene Elastomer/Nano CaCO3 Composites,Journal Of Thermoplastic Composite Materials,21,(2),123-140

29. Salmah, H.; Ismail, H.; Abu Bakar, A.,(2008), The Effects of Dynamic Vulcanization and Compatibilizer on Properties of Paper Sludge-Filled Polypropylene/Ethylene Propylene Diene Terpolymer Composites,Journal Of Applied Polymer Science,107,(4),2266-2273

30. Julkapli, Nurhidayatullaili Muhd; Ahmad, Zulkifli; Akil, Hazizan Md,(2008), Preparation and Properties Of Kenaf Dust-Filled Chitosan Biocomposites,Conference: International Conference on Natural Polymers, Bio-Polymers, Biomaterials and Their Composites, Blends, IPNs and Gels, from Macro to Nano Scales Location: Kottayam, INDIA Date: NOV 19-21, 2007 Sponsor(s): Inst Macromole Sci & Engn,Composite Interfaces,15,(7-9),851-866

31. Chow, W. S.; Yap, Y. P.,(2008), Optimization of Process Variables on Flexural Properties of Epoxy/Organo-Montmorillonite Nanocomposite by Response Surface Methodology,Express Polymer Letters,2,(1),2-11

32. Teh, P. L.; Mariatti, M.; Akil, H. M.;Seetharamu K.N.;Wagiman A.N.R;Beh K.S.,(2008), Effect of Ethanol As Diluent On The Properties Of Mineral Silica Filled Epoxy Composites,Journal Of Composite Materials,42,(2),129-142

33. Chow, Wen Shyang; Khim, Loo Yok; Kang, Ang Tze,(2008), Flexural Properties of Polystyrene/Organo-Montmorillonite Masterbatch Composites,Journal Of Reinforced Plastics And Composites,27,(3),255-261

34. Teh, P. L.; Mariatti, M.; Wagiman, A. N. R.;Beh K.S.,(2008), Effect of Curing Agent on The Properties Of Mineral Silica Filled Epoxy Composites,Polymer Composites,29,(1),27-36

35. Osman, H.; Ismail, H.; Mariatti, M.,(2008), the Effect of Recycled Newspaper Content And Size on The Properties of Polypropylene (PP)/Natural Rubber (NR) Composites,Polymer-Plastics Technology And Engineering,47,(1),23-29

36. Rozman, H. D.; Faiza, M. A.; Kumar, R. N.,(2008), A Preliminary Study on Ultraviolet Radiation-Cured Biofiber Composites From Oil Palm Empty Fruit Bunch,Polymer-Plastics Technology And Engineering,47,(4),358-362

37. Noriman, N. Z.; Ismail, H.; Rashid, Azura,(2008), Curing Characteristics and Mechanical and Morphological Properties of Styrene Butadiene Rubber/Virgin Acrylonitrile-Butadiene Rubber (SBR/vNBR) and Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber (SBR/rNBR) blends,Polymer-Plastics Technology And Engineering,47,(10),1016-1023

38. Chow, W. S.; Teoh, J. K.; Lim, L. Y.,(2008), Mechanical and Hygrothermal Aging Study on Polystyrene/Organo-Montmorillonite Nanocomposites,Polymer-Plastics Technology And Engineering,47,(10),1040-1045

39. Khalil, H. P. S. Abdul; Firdaus, M. Y. Nur; Anis, M.;Ridzuan R.,(2008), the Effect Of Storage Time And Humidity On Mechanical And Physical Properties Of Medium Density Fiberboard (MDF) from Oil Palm Empty Fruit Bunch and Rubberwood,Polymer-Plastics Technology And Engineering,47,(10),1046-1053

40. Lai, W. L.; Mariatti, M.; Mohamad, Jani S.,(2008), The Properties of Woven Kenaf and Betel Palm (Areca catechu) Reinforced Unsaturated Polyester Composites,Polymer-Plastics Technology And Engineering,47,(12),1193-1199 Article Number: PII 906044047
1. Ansari, M. N. M.; Ismail, H.,(2009), The Effect of Silane Coupling Agent on Mechanical Properties of Feldspar Filled Polypropylene Composites,Journal Of Reinforced Plastics And Composites,28,(24),3049-3060

2. Sam, S. T.; Ismail, H.; Ahmad, Z.,(2009), Linear Low-Density Polyethylene/(Soya Powder) Blends Containing Polyethylene-g-(Maleic Anhydride) as a Compatibilizer,Journal Of Vinyl & Additive Technology,15,(4),252-259

3. Jikan, S. S.; Samsudin, M. S. F.; Ariff, Z. M.;Ishak Z.A.M.;Ariffin A.,(2009),Relationship of Rheological Study with Morphological Characteristics of Multicomponent (Talc and Calcium Carbonate) Filled Polypropylene Hybrid Composites,Journal Of Reinforced Plastics And Composites,28,(21).2577-258

4. Lin, Ong Hui; Akil, Hazizan Md; Ishak, Z. A. Mohd.,(2009), Characterization and Properties of Activated Nanosilica/Polypropylene Composites With Coupling Agents,Polymer Composites,30,(11),1693-1700

5. Ansari, M. N. M.; Ismail, H.; Zein, S. H. S.,(2009), Effect of Multi-walled Carbon Nanotubes on Mechanical Properties of Feldspar Filled Polypropylene Composites,Journal Of Reinforced Plastics And Composites,28,(20),2473-2485

6. Pasbakhsh, Pooria; Ismail, Hanafi; Noor, Mohd;Fauzi A.;Abu Bakar A.,(2009), The Partial Replacement of Silica or Calcium Carbonate by Halloysite Nanotubes as Fillers in Ethylene Propylene Diene Monomer Composites,Journal Of Applied Polymer Science,113,(6),3910-3919

7. Akil, Hazizan Md; Cheng, Leong Wei; Ishak, Z. A. M.;Abu Bakar A.;Rahman M.A.A.,(2009), Water Absorption Study on Pultruded Jute Fibre Reinforced Unsaturated Polyester Composites,Composites Science And Technology,69,(11-12),1942-1948

8. Yap, Y. P.; Chow, W. S.,(2009), Effect of Mixing Sequences on the Flexural and Morphological Properties of Epoxy/Organo-Montmorillonite Nanocomposites,Journal Of Composite Materials,43,(20),2269-2284

9. Pasbakhsh, Pooria; Ismail, H.; Fauzi, M. N. Ahmad;Abu Bakar A.,(2009), influence of Maleic Anhydride Grafted Ethylene Propylene Diene Monomer (MAH-g-EPDM) on the Properties of EPDM Nanocomposites Reinforced by Halloysite Nanotubes,Polymer Testing,28,(5),548-559

10. Chua, T. P.; Mariatti, M.; Azizan, A.;Rashid A.A.,(2009), Surface Functionalization of Multi-Walled Carbon Nanotubes Via Electron Reduction of Benzophenone by Potassium Metal,Journal Of Alloys And Compounds,480,(2),534-536

11. Yew, G. H.; Chow, W. S.; Ishak, Z. A. Mohd;Yusof A.M.M.,(2009), Natural Weathering of Poly (Lactic Acid): Effects of Rice Starch and Epoxidized Natural Rubber,Journal Of Elastomers And Plastics,41,(4),369-382

12. Jannah, M.; Mariatti, M.; Bakar, A. Abu;Khalil H.P.S.A.,(2009), Effect of Chemical Surface Modifications on the Properties of Woven Banana-Reinforced Unsaturated Polyester Composites,Journal Of Reinforced Plastics And Composites,28,(12),1519-1532

13. Wahit, M. U.; Hassan, A.; Ishak, Z. A. Mohd;Czigany T.,(2009), Ethylene-Octene Copolymer (POE) Toughened Polyamide 6/Polypropylene Nanocomposites: Effect of POE Maleation,Express Polymer Letters,3,(5),309-319

14. Khalil, H. P. S. Abdul; Kang, C. W.; Khairul, A.;Ridzuan R.;Adawi T.O.,(2009), The Effect of Different Laminations on Mechanical and Physical Properties of Hybrid Composites,Journal Of Reinforced Plastics And Composites,28,(9),1123-1137

15. Nurdina, A. K.; Mariatti, M.; Samayamutthirian, R.,(2009), Effect of Single-Mineral Filler and Hybrid-Mineral Filler Additives on the Properties of Polypropylene Composites,Journal Of Vinyl & Additive Technology,15,(1),20-28]

16. Lin, Ong Hui; Ishak, Z. A. Mohd; Akil, Hazizan Md.(2009), Preparation and Properties Of Nanosilica-Filled Polypropylene Composites with PP-Methyl POSS As Compatibiliser,Materials & Design,30,(3),748-751

17. Chow, W. S.; Tham, W. L.,(2009), Effects of Antistatic Agent on The Mechanical, Morphological and Antistatic Properties of Polypropylene/Organo-Montmorillonite Nanocomposites,Express Polymer Letters,3,(2),116-125

18. Chow, W. S.; Lok, S. K.,(2009), Thermal properties of poly(lactic acid)/organo-montmorillonite nanocomposites,Conference: 5th International/7th China-Japan Joint Symposium on Calorimetry and Thermal Analysis and Exhibition Location:Dalian, PEOPLES R CHINA Date: MAY 18-22, 2008 Sponsor(s): Chinese Chem Soc, Comm Chem Themodynam & Thermal Anal; Japan Soc Calometry & Thermal Anal; Dalian Inst Chem Phys; Chinese Acad Sci
,Journal Of Thermal Analysis And Calorimetry,95,(2),627-632

19. Lin, Ong Hui; Akil, Hazizan Md; Mahmud, Shahrom,(2009), Effect Of Particle Morphology On The Properties Of Polypropylene/Nanometric Zinc Oxide (Pp/Nanozno) Composites,Advanced Composites Letters,18(3),77-83

20. Lin, Ong Hui; Akil, Hazizan Md; Ishak, Z. A. M.,(2009), Comparative Study Between Pp-G-Mah And Pp-Methyl-Poss As Compatibilizer For Nanosio(2)/Pp Composites: Mechanical And Morphological Properties,Advanced Composites Letters,18,(6),183-190

21. Taib, R. Mat; Ramarad, S.; Ishak, Z. A. Mohd;Rozman H.D.,(2009), Effect of Immersion Time in Water on the Tensile Properties of Acetylated Steam-exploded Acacia mangium Fibers-Filled Polyethylene Composites,Journal Of Thermoplastic Composite Materials,22,(1),83-98

22. Rashid, Erfan Suryani Abd; Ariffin, Kamarshah; Kooi, Chee Choong;Akil H.M.,(2009), Preparation and properties of POSS/epoxy composites for electronic packaging applications,Materials & Design,30,(1),1-8

23. Ismail, H.; Pasbakhsh, Pooria; Fauzi, M. N. Ahmad;Abu Bakar A.,(2009), The Effect of Halloysite Nanotubes as a Novel Nanofiller on Curing Behaviour, Mechanical and Microstructural Properties of Ethylene Propylene Diene Monomer (EPDM) Nanocomposites,Polymer-Plastics Technology And Engineering,48,(3),313-323 Article Number: PII 909032960

24. Chow, Wen Shyang; Tham, Wei Ling.,(2009), Thermal and Antistatic Properties of Polypropylene/Organo Montmorillonite Nanocomposites,Polymer-Plastics Technology And Engineering,48,(4),342-350 Article Number: PII 910063544

25. Tang, L. S.; Mariatti, M.,(2009), Comparison on the Properties of Nickel-Coated Graphite (NCG) and Graphite Particles as Conductive Fillers in Polypropylene (PP) Composites,Polymer-Plastics Technology And Engineering,48,(6),614-620 Article Number: PII 911102525

26. Najib, N. N.; Ismail, H.; Azura, A. R.,(2009), Thermoplastic Elastomer Composites of Palm Ash-Filled Ethylene Vinyl Acetate/Natural Rubber Blends: Effects of Palm Ash Loading and Size,Polymer-Plastics Technology And Engineering,48,(10),1062-1069

27. Ismail, H.; Ahmad, Z.; Nordin, Razif;Rashid A.R.,(2009), Processibility and Miscibility Studies of Uncompatibilized Linear Low Density Polyethylene/Poly(Vinyl Alcohol) Blends,Polymer-Plastics Technology And Engineering,48,11,1191-1197 Article Number: PII 91585757228. Ansari, M. N. M.; Ismail, H.,(2009), Effect of Compatibilisers on Mechanical Properties of Feldspar/Polypropylene Composites,Polymer-Plastics Technology And Engineering,48,(12),1295-1303
1. Khanam, P. Noorunnisa; Khalil, H. P. S. Abdul; Jawaid, M.;Reddy G.R.;Narayana C.S.;Naidu S.V.,(2010), Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties,Journal Of Polymers And The Environment,18,(4),727-733
2. Ariffin, A.; Mansor, A. S.; Jikan, S. S.;Ishak Z.A.M.,(2010), Evaluation of Hybridizing Talc and Surface-Treated Kaolin on the Properties of PP Hybrid Composites,Journal Of Reinforced Plastics And Composites,29,(23),3429-3441
3. Yusoff, N. S. M.; Ahmad, M. S. B.; Akil, H. M.;Ariffin K.S.;Ariffin A.,(2010), Contact Angle of Untreated/Treated Kaolin and Its Correlation With The Mechanical Properties of PP-Kaolin Composites,Journal Of Reinforced Plastics And Composites,29,(23),3442-3449

4. Jikan, S. S.; Ariff, Z. M.; Ariffin, A.,(2010), Influence of Filler Content and Processing Parameter on the Crystallization Behaviour of PP/Kaolin Composites,Journal Of Thermal Analysis And Calorimetry,102,(3),1011-1017

5. Sam, S. T.; Ismail, H.; Ahmad, Z..(2010), Effect of Epoxidized Natural Rubber on the Processing Behavior, Tensile Properties, Morphology, and Thermal Properties of Linear-Low-Density Polyethylene/Soya Powder Blends,Journal Of Vinyl & Additive Technology,16,(4),238-245

6. Nosbi, Norlin; Akil, Hazizan Md; Ishak, Z. A. Mohd; Abu Bakar A.,(2010), Degradation of compressive Properties of Pultruded Kenaf Fiber Reinforced Composites After Immersion in Various Solutions,Materials & Design,3,(10),4960-4964

7. Jawaid, M.; Khalil, H. P. S. Abdul; Abu Bakar, A.,(2010), Mechanical Performance of Oil Palm Empty Fruit Bunches/Jute Fibres Reinforced Epoxy Hybrid Composites,Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing,527,(29-30),7944-7949

8. Kalam, A.; Berhan, M. N.; Ismail, H.,(2010), Physical and Mechanical Characterizations of Oil Palm Fruit Bunch Fiber Filled Polypropylene Composites,Journal Of Reinforced Plastics And Composites,29,(21),3173-3184

9. Amouzgar, Parisa; Khalil, H. P. S. Abdul; Salamatinia, Babak; Abdullah A.Z.;Issam A.M.,(2010), Optimization of Bioresource Material From Oil Palm Trunk Core Drying Using Microwave Radiation; A Response Surface Methodology Application,Bioresource Technology,101,(21),8396-8401

10. Bhat, Irshad ul Haq; Abdullah, C. K.; Khalil, H. P. S. Abdul;Ibrahim M.H.;Fazita M.R.N.,(2010), properties Enhancement of Resin Impregnated Agro Waste: Oil Palm Trunk Lumber,Journal Of Reinforced Plastics And Composites,29,(22),3301-3308

11. Tham, W. L.; Chow, W. S.; Ishak, Z. A. Mohd.,(2010), The Effect of 3-(Trimethoxysilyl) Propyl Methacrylate on the Mechanical, Thermal, and Morphological Properties of Poly(methyl methacrylate)/Hydroxyapatite Composites,Journal Of Applied Polymer Science,118,(1),218-228

12. Fuad, M. Y. A.; Hanim, H.; Zarina, R.;Ishak Z.A.M.;Hassan A..,(2010), Polypropylene/calcium carbonate nanocomposites - effects of processing techniques and maleated polypropylene compatibiliser,Express Polymer Letters,4,(10),611-620

13. Yusriah, L.; Mariatti, M.; Abu Bakar, A.,(2010). The properties of vinyl ester composites reinforced with different types of woven fabric and hollow phenolic microspheres,Journal Of Reinforced Plastics And Composites,29,(20),3066-3073

14. Aminullah, A.; Mustafa, S. J. Syed; Azlan, M. R. Nor;Hafizi N.M.;Ishak Z.A.M.;Rozman H.D.,(2010), Effect Of Filler Composition and Incorporation of Additives on the Mechanical Properties of Polypropylene Composites With High Loading Lignocellulosic Materials,Journal Of Reinforced Plastics And Composites,29,(20),3115-3124

15. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin;Mazuki A.A.M.;Yokoyama T.,(2010), Dynamic Properties of Pultruded Natural Fibre Reinforced Composites Using Split Hopkinson Pressure Bar Technique,Materials & Design,31,(9),4209-4218

16. Khalil, H. P. S. Abdul; Firdaus, M. Y. Nur; Jawaid, M.;Anis M.;Ridzuan R.;Mohamed A.R.,(2010), Development And Material Properties of New Hybrid Medium Density Fibreboard From Empty Fruit Bunch and Rubberwood,Materials & Design,31,(9),4229-4236

17. Bakare, I. O.; Okieimen, F. E.; Pavithran, C.;Khalil H.P.S.A.;Brahmakumar M.,(2010), Mechanical and Thermal Properties of Sisal Fiber-Reinforced Rubber Seed Oil-Based Polyurethane Composites,Materials & Design,31,(9)4274-4280

18. Ismail, H.; Shaari, S. M.,(2010), Curing Characteristics, Tensile Properties and Morphology of Palm Ash/Halloysite Nanotubes/Ethylene-Propylene-Diene Monomer (EPDM) Hybrid Composites,Polymer Testing,29,(7),872-878

19. Ariffin, A.; Ariff, Z. M.; Jikan, S. S.,(2010), Effects of Kaolin and Maleic Anhydride Contents on Melt Elasticity And Flexural Behaviour of Polypropylene/Kaolin And Unplasticised Poly(Vinyl Chloride)/Kaolin Composites,E-Polymers,Article Number:095

20. Tham, W. L.; Chow, W. S.; Ishak, Z. A. Mohd,(2010), Simulated Body Fluid And Water Absorption Effects on Poly(Methyl Methacrylate)/Hydroxyapatite Denture Base Composites,Express Polymer Letters,4,(9),517-528

21. Phua, Y. J.; Ishak, Z. A. Mohd; Senawi, R.(2010),Injection Molded Short Glass and Carbon Fibers Reinforced Polycarbonate Hybrid Composites: Effects of Fiber Loading,Journal Of Reinforced Plastics And Composites,29,(17),2592-2603

22. Chan, K. L.; Mariatti, M.; Lockman, Z.; Sim L.C.,(2010), Effect of Ultrasonication Medium on The Propertiesof Copper Nanoparticle-Filled Epoxy Composite for Electrical Conductive Adhesive (Eca) Application,Journal Of Materials Science-Materials In Electronics,21,(8),772-778

23. Chow, Wen Shyang; Tan, Pi Lin.,(2010), Epoxy/Multiwall Carbon Nanotube Nanocomposites Prepared By Sonication and Planetary Mixing Technique,Journal Of Reinforced Plastics And Composites,2,(15),2331-2342

24. Firoozian, P.; Akil, Hazizan Md; Khalil, H. P. S. Abdul,(2010), Prediction of Mechanical Properties of Mica-filled Epoxy Composite Using Various Mechanical Models,Journal Of Reinforced Plastics And Composites,29,(15),2368-2378

25. Ismail, H.; Abdullah, A. Hamid; Abu Bakar, A.,(2010), Kenaf Core Reinforced High-density Polyethylene/Soya Powder Composites: The Effects of Filler Loading and Compatibilizer,Journal Of Reinforced Plastics And Composites,29,(16),2489-2497

26. Khalil, H. P. S. Abdul; Firoozian, P.; Bakare, I. O.;Akil H.M.;Noor A.M.,(2010), Exploring Biomass Based Carbon Black as Filler In Epoxy Composites: Flexural and Thermal Properties,Materials & Design,31,(7),3419-3425

27. Kusmono; Ishak, Z. A. Mohd; Chow, W. S.;(2010), Effects of Compatibilizers and Testing Speeds on the Mechanical Properties of Organophilic Montmorillonite Filled Polyamide 6/Polypropylene Nanocomposites,Polymer Engineering And Science,50,(8),1493-1504

28. Tham, W. L.; Chow, W. S.; Ishak, Z. A. Mohd.,(2010),Flexural and Morphological Properties of Poly(Methyl Methacrylate)/Hydroxyapatite Composites: Effects of Planetary Ball Mill Grinding Time,Journal Of Reinforced Plastics And Composites,29,(13),2065-2075

29. Taib, Razaina Mat; Ramarad, Suganti; Ishak, Zainal Arifin Mohd;Todo M.,(2010), Properties of Kenaf Fiber/Polylactic Acid Biocomposites Plasticized with Polyethylene Glycol,Polymer Composites,31,(7),1213-12

30. Dahlan, Irvan; Ahmad, Zainal; Fadly, Muhammad;Lee K.T.;Kamaruddin A.H.;Mohamed A.R,(2010),Parameters Optimization of Rice Husk Ash (RHA)/CaO/CeO2 Sorbent For Predicting SO2/NO Sorption Capacity Using Response Surface and Neural Network Models,Journal Of Hazardous Materials,178,(1-3),249-257

31. Abu Bakar, M. B.; Ishak, Z. A. Mohd; Taib, R. Mat;Rozman H.D.;Jani S.M.,(2010),Flammability and Mechanical Properties of Wood Flour-Filled Polypropylene Composites,Journal Of Applied Polymer Science,116,(5),2714-2722

32. Chang, L. N.; Chow, W. S.,(2010),Accelerated Weathering on Glass Fiber/Epoxy/Organo-montmorillonite Nanocomposites,Journal Of Composite Materials,44,(12),1421-1434

33. Osman, Hakimah; Ismail, Hanafi; Mustapha, Mariatti.,(2010),Effects of Maleic Anhydride Polypropylene on Tensile, Water Absorption, and Morphological Properties of Recycled Newspaper Filled Polypropylene/Natural Rubber Composites,Journal Of Composite Materials,44,(12),1477-1491

34. Khalil, H. P. S. Abdul; Poh, B. T.; Jawaid, M.;Ridzuan R.;Suriana R.;Said M.R.;Ahmad F.;Fuad N.A.N.,(2010), The Effect of Soil Burial Degradation of Oil Palm Trunk Fiber-filled Recycled Polypropylene Composites,Journal Of Reinforced Plastics And Composites,29,(11),1653-1663

35. Tay, G. S.; Zaim, J. Mohd; Rozman, H. D.,(2010), Mechanical Properties of Polypropylene CompositeReinforced with Oil Palm Empty Fruit Bunch Pulp,Journal Of Applied Polymer Science,116,(4),1867-1872

36. Akil, Hazizan Md.; De Rosa, Igor M.; Santulli, Carlo;Sarasini F.,(2010), Flexural Behaviour of Pultruded Jute/Glass and Kenaf/Glass Hybrid Composites Monitored Using Acoustic Emission,Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing,527,(12),2942-2950

37. Chua, T. P.; Mariatti, M.; Azizan, A.;Rashid A.A.,(2010), Effects of surface-Functionalized Multi-Walled Carbon Nanotubes on The Properties of Poly(Dimethyl Siloxane) Nanocomposites,Composites Science And Technology,70,(4),671-677

38. Khalil, H. P. S. Abdul; Poh, B. T.; Issam, A. M.;Jawaid M.;Ridzuan R.,(2010), Recycled Polypropylene-Oil Palm Biomass: The Effect on Mechanical and Physical Properties,Journal Of Reinforced Plastics And Composites,29,(8),1117-1130

39. Khalil, H. P. S. Abdul; Bhat, Aamir H.; Jawaid, Mohammad;Amouzgar P.;Ridzuan R.;Said M.R.,(2010), Agro-Wastes: Mechanical and Physical Properties of Resin Impregnated Oil Palm Trunk Core Lumber,Polymer Composites,31,(4),638-644

40. Rozman, H. D.; Zuliahani, A.; Tay, G. S.,(2010), Effects of Rice Husk (RH) Particle Size, Glass Fiber (GF) Length, RH/GF Ratio, and Addition of Coupling Agent on the Mechanical and Physical Properties of Polypropylene-RH-GF Hybrid Composites,Journal Of Applied Polymer Science,115,(6),3456-3462

41. Rozman, H. D.; Rozyanty, A. R.; Tay, G. S.;Kumar R.N.,(2010), The Effect of Glycidyl Methacrylate Treatment of Empty Fruit Bunch (EFB) on the Properties of Ultra-Violet Radiation Cured EFB-Unsaturated PolyesterComposite,Journal Of Applied Polymer Science,115,(5),2677-268

42. Yusriah, L.; Mariatti, M.; Abu Bakar, A.,(2010), Mechanical Properties of Particulate-Filler/Woven-Glass-Fabric-Filled Vinyl Ester Composites,Journal Of Vinyl & Additive Technology,16,(1),98-104

43. Taib, R. Mat; Ramarad, S.; Ishak, Z. A. Mohd;Rozman H.D.,(2010), Effect of Acetylation and MAPE on the Properties of Steam-Exploded Acacia mangium Fiber-HDPE Composites,Journal Of Reinforced Plastics And Composites,29,(3),431-444

44. Akil, Hazizan Md; Cheng, Leong Wei; Affzan, M. H.;Abu Bakar A.;Ishak Z.A.M.,(2010), Water Absorption Study On Pultruded E-Glass Fibre Reinforced Unsaturated Polyester Composites,Advanced Composites Letters,19,(3),101-107

45. Khalil, H. P. S. Abdul; Bhat, Irshad-ul-Haq; Sartika, M. Y.,(2010), Degradation, Mechano-Physical, And Morphological Properties Of Empty Fruit Bunch Reinforced Polyester Composites,Bioresources,5,(4),2278-2296

46. Ismail, H.; Haw, F. S.,(2010), Curing Characteristics and Mechanical Properties of Hybrid Palm Ash/Silica/Natural Rubber Composites,Journal Of Reinforced Plastics And Composites,29,(1),105-111

47. Rozman, H. D.; Rozyanty, A. R.; Musa, L.;Tay G.S.,(2010), Ultra-Violet Radiation-Cured Biofiber Composites from Kenaf: The Effect of Montmorillonite on the Flexural and Impact Properties,Journal Of Wood Chemistry And Technology,30,(2),152-163 Article Number:PII 92224668

48. Khalil, H. P. S. Abdul; Fazita, M. R. Nurul; Bhat, A. H.;Jawaid M.;Fuad N.A.N.,,(2010),Development and Material Properties Of New Hybrid Plywood From Oil Palm Biomass,Materials & Design,31,(1),417-424

49. Ismail, H.; Galpaya, D.; Ahmad, Z.,(2010), Effects of Dynamic Vulcanization on Tensile Properties, Morphology and Natural Weathering of Polypropylene/Recycled Acrylonitrile Butadiene Rubber (PP/NBRr) Blends,Polymer-Plastics Technology And Engineering,49,(1),110-119

50. Julkapli, Nurhidayatullaili Muhd; Akil, Hazizan Md,(2010), Thermal Properties of Kenaf-Filled Chitosan Biocomposites,Polymer-Plastics Technology And Engineering,49,(2),147-153

51. Ismail, Hanafi; Ramly, Faizal; Othman, Nadras.,(2010), Multiwall Carbon Nanotube-Filled Natural Rubber: The Effects of Filler Loading and Mixing Method,Polymer-Plastics Technology And Engineering,49,(3),260-266

52. Supri, A. G.; Ismail, H.; Shuhadah, S.,(2010), Effect of Polyethylene-Grafted Maleic Anhydride (PE-g-MAH) on Properties of Low Density Polyethylene/Eggshell Powder (LDPE/ESP) Composites,Polymer-Plastics Technology And Engineering,49,(4),347-353

53. Ismail, H.; Norjulia, A. M.; Ahmad, Z.,(2010), The Effects of Untreated and Treated Kenaf Loading on the Properties of Kenaf Fibre-Filled Natural Rubber Compounds,Polymer-Plastics Technology And Engineering,49,(5),519-524

54. Ismail, H.; Ooi, Z. X.,(2010), The Effect of Epoxidized Natural Rubber (ENR-50) as a Compatibilizer on Properties of High-Density Polyethylene/Soya Powder Blends,Polymer-Plastics Technology And Engineering,49,(7),688-693

55. Supri, Abdul Ghani; Ismail, Hanafi,(2010), The Effect of NCO-Polyol on the Properties of Low-Density Polyethylene/Water Hyacinth Fiber (Eichhornia crassiper) Composites,Polymer-Plastics Technology And Engineering,49,(8),766-771

56. Din, Rozman Hj.; Musa, Lugman; Aziz, Azniwati Abd;Tay G.S.,(2010), Unsaturated Polyester-Kenaf Composites: The Effects of a Modified Montmorillonite Filler on the Tensile Properties,Polymer-Plastics Technology And Engineering,49,(9),929-937 Article Number: PII 924467956

57. Ismail, H.; Norjulia, A. M.; Ahmad, Z.,(2010), Curing Characteristics, Mechanical and Morphological Properties of Kenaf Fibre/Halloysite Nanotubes Hybrid-Filled Natural Rubber Compounds,Polymer-Plastics Technology And Engineering,49,(9),938-943 Article Number: PII 924466977

58. Julkapli, Nurhidayatullaili Muhd; Akil, Hazizan Md,(2010), Influence of a Plasticizer on the Mechanical Properties of Kenaf-Filled Chitosan Bio-Composites,Polymer-Plastics Technology And Engineering,49,(9),944-951 Article Number: PII 924467733

59. Ismail, H.; Abdullah, A. Hamid; Abu Bakar, A.,(2010), The Effects of a Silane-Based Coupling Agent on the Properties of Kenaf Core-Reinforced High-Density Polyethylene (HDPE)/Soya Powder Composites,Polymer-Plastics Technology And Engineering,49,(11),1095-1100 Article Number: PII 926929978

60. Chou, P. M.; Mariatti, M.,(2010), The Properties of Polymethyl Methacrylate (PMMA) Bone Cement Filled with Titania and Hydroxyapatite Fillers,Polymer-Plastics Technology And Engineering,49,(12),1163-1171 Article Number: PII 926945734

61. Ismail, H.; Ragunathan, S.; Hussin, K.,(2010),The Effects of Recycled Acrylonitrile Butadiene Rubber Content and Maleic Anhydride Modified Polypropylene (PPMAH) on the Mixing, Tensile Properties, Swelling Percentage and Morphology of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder (PP/NBRr/RHP) Composites,Polymer-Plastics Technology And Engineering,49,(3),1323-1328
1. Thirmizir, M. Z. Ahmad; Ishak, Z. A. Mohd; Taib, R. M.;Rahim S.;Jani S.M.,(2011), Kenaf-Bast-Fiber-Filled Biodegradable Poly(butylene succinate) Composites: Effects of Fiber Loading, Fiber Length, and Maleated Poly(butylene succinate) on the Flexural and Impact Properties,Journal Of Applied Polymer Science,122(5),3055-3063

2. Zainal, Zuriati; Ismail, Hanafi.,(2011), Polypropylene/(Waste Tire Dust)/(Short Glass Fiber Composites): Effects of Silane Coupling Agent and Dynamic Vulcanization,Journal Of Vinyl & Additive Technology,17,(4),245-253

3. Du Ngoc Uy Lan; Hadano, Shingo; Abu Bakar, A.;Azahari B.;Ariff Z.M.;Choju Y.,(2011), Preparation Of Poly(Methyl Methacrylate) and Polystyrene-Composite-Filled Porous Epoxy Microparticles Via In-Situ Suspension Polymerization,Polymer Testing,30(8),841-847

4. Jawaid, M.; Khalil, H. P. S. Abdul; Abu Bakar, A.,(2011), Hybrid Composites of Oil Palm Empty Fruit Bunches/Woven Jute Fiber: Chemical Resistance, Physical, and Impact Properties,Journal Of Composite Materials,45(24)2515-2522

5. Tay, Guan-Seng; Nanbo, Takashi; Hatakeyama, Hyoe;Hatakeyama T.,(2011), Polyurethane Composites Derived From Glycerol and Molasses Polyols Filled With Oil Palm Empty Fruit Bunches Studied by TG and DMA,Thermochimica Acta,525(1-2),190-196

6. Low, L. F.; Abu Bakar, A.,(2011), Advanced Hollow Epoxy Particle-Filled Composites,Journal Of Composite Materials,45(22),2287-2299

7. Tham, W. L.; Chow, W. S.; Ishak, Z. A. Mohd.,(2011), Effects of Titanate Coupling Agent on the Mechanical, Thermal, And Morphological Properties Of Poly(Methyl Methacrylate)/Hydroxyapatite Denture Base Composites,Journal Of Composite Materials,45,(22),2335-2345

8. Voo, Richard; Mariatti, M.; Sim, L. C.,(2011), Properties of Epoxy Nanocomposite Thin Films Prepared by Spin Coating Technique,Journal Of Plastic Film & Sheeting,27,(4),331-346

9. Lin, Ong Hui; Akil, Hazizan Md; Ishak, Z. A. Mohd.,(2011), Surface-Activated Nanosilica Treated With Silane Coupling Agents/Polypropylene Composites: Mechanical, Morphological, and Thermal Studies,Polymer Composites,32,(10),1568-1583

10. Ismail, H.; Shaari, S. M.; Othman, N.,(2011), the Effect of Chitosan Loading on the Curing Characteristics, Mechanical and Morphological Properties of Chitosan-Filled natural rubber (NR), Epoxidised Natural Rubber (ENR) and Styrene-Butadiene Rubber (SBR) Compounds,Polymer Testing,30,(7),784-79011. Chan, K. L.; Mariatti, M.; Lockman, Z.;Sim L.C.,(2011), Effects of the Size and Filler Loading on the Properties of Copper- and Silver-Nanoparticle-Filled Epoxy Composites,Journal Of Applied Polymer Science,121,(6),3145-3152

12. Nabil, H.; Ismail, H.; Azura, A. R.,(2011), Recycled Polyethylene Terephthalate Filled Natural Rubber Compounds: Effects of Filler Loading and Types of Matrix,Journal Of Elastomers And Plastics,43,(5),429-449

13. Chang, B. P.; Akil, Hazizan Md; Nasir, Ramdziah Md.;Nurdijati S.,(2011), Mechanical and Antibacterial Properties of Treated and Untreated Zinc Oxide filled UHMWPE Composites,Journal Of Thermoplastic Composite Materials,24(5),653-667

14. Ismail, H.; Ragunathan, S.; Hussin, K.,(2011), Tensile Properties, Swelling, and Water Absorption Behavior of Rice-Husk-Powder-Filled Polypropylene/(Recycled Acrylonitrile-Butadiene Rubber) Composites,Journal Of Vinyl & Additive Technology,17(3),190-197

15. Ooi, Z. X.; Ismail, H.; Abu Bakar, A.;Aziz N.A..,(2011), Effects of Jackfruit Waste Flour on the Properties of Poly(vinyl alcohol) Film,Journal Of Vinyl & Additive Technology,17(3),198-208

16. Akil, H. M.; Omar, M. F.; Mazuki, A. A. M.;Safiee S.;Ishak Z.A.M.;Abu Bakar A.,(2011), Kenaf Fiber Reinforced Composites: A review,Materials & Design,32,(8-9),4107-4121

17. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin.,(2011), Measurement and Prediction of Compressive Properties of Polymers At High Strain Rate Loading,Materials & Design,32,(8-9),4207-4215

18. Jawaid, M.; Khalil, H. P. S. Abdul.,(2011), cellulosic/Synthetic Fibre Reinforced Polymer Hybrid Composites: A review,Carbohydrate Polymers,86,(1),1-18

19. Khalil, H. P. S. Abdul; Khairul, A.; Bakare, I. O.;Bhat I.U.H.,(2011), Thermal, Spectroscopic, and Flexural Properties of Anhydride Modified Cultivated Acacia Spp.,Wood Science And Technology,45,(3),597-606

20. Julkapli, Nurhidayatullaili Muhd; Ahmad, Zulkifli; Akil, Hazizan Md.,(2011), Mechanical Properties of 1,2,4,5-Benzene Tetra Carboxylic Chitosan-Filled Chitosan Biocomposites,Journal Of Applied Polymer Science,121,(1),111-126

21. Kong, S. M.; Mariatti, M.; Busfield, J. J. C.,(2011), Effects of Types of Fillers and Filler Loading on the Properties of Silicone Rubber Composites,Journal Of Reinforced Plastics And Composites,30,(13),1087-1096

22. Rashid, E. S. A.; Rasyid, M. F. A.; Akil, H. Md;Ariffin K.;Kooi C.C.,(2011), effect Of (3-Aminopropyl) Triethylsilane Treatment On Mechanical and Thermal Properties of Alumina-Filled Epoxy Composites,Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications,225(L3),160-170

23. Phua, Y. J.; Chow, W. S.; Ishak, Z. A. Mohd.,(2011), The Hydrolytic Effect of Moisture and Hygrothermal Aging on Poly(Butylene Succinate)/Organo-Montmorillonite Nanocomposites,Polymer Degradation And Stability,96(7),1194-1203

24. Anuar, S. Khairul; Mariatti, M.; Azizan, A.;Mang N. Chee.;Tham W.T.,(2011), Effect of Different Types of Silver and Epoxy Systems on the Properties of Silver/Epoxy Conductive Adhesives,Journal Of Materials Science-Materials In Electronics,22,(7),757-764

25. Julkapli, Nurhidayatullaili Muhd; Ahmad, Zulkifli; Akil, Hazizan Md.,(2011), Effects of Different Ph Medium On Swelling Properties of 1,2,4,5-Benzenetetracarboxylic-Chitosan-Filled Chitosan Bio-Composites,Polymer Bulletin,67,(2),291-320

26. Samsudin, S. S.; Ariff, Z. M.; Zakaria, Z.; Bakar A.A.,(2011), development And Characterization Of Epoxy Syntactic Foam Filled With Epoxy Hollow Spheres,Express Polymer Letters,5,(7),653-660

27. Jawaid, M.; Khalil, H. P. S. Abdul; Abu Bakar, A.,(2011), Woven Hybrid Composites: Tensile And Flexural Properties Of Oil Palm-Woven Jute Fibres Based Epoxy Composites,Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing,528,(15),5190-5195

28. Alias, Asliza; Ahmad, Z.; Ismail, A. B.,(2011), Preparation of Polyimide/Al2o3 Composite Films As Improved Solid Dielectrics,Materials Science And Engineering B-Advanced Functional Solid-State Materials,176(10),799-802

29. Rozman, H. D.; Koay, E. L.; Tay, G. S.,(2011), Preliminary Study on the Utilization of Lignin as Filler in Ultra-Violet (UV) Curable System,Journal Of Applied Polymer Science,120,(5),2527-2533

30. Husseinsyah, Salmah; Amri, Faisal; Husin, Kamarudin;Ismail H.,(2011), Mechanical and Thermal Properties of Chitosan-Filled Polypropylene Composites: The Effect of Acrylic Acid,Journal Of Vinyl & Additive Technology,17,(2),125-131

31. Ismail, H.; Abdullah, A. Hamid; Abu Bakar, A.,(2011), Influence of Acetylation on the Tensile Properties, Water Absorption, and Thermal Stability of (High-Density Polyethylene)/(Soya Powder)/(Kenaf Core) Composites,Journal Of Vinyl & Additive Technology,17,(2),132-137

32. Noriman, N. Z.; Ismail, H.,(2011), The Effects Of Electron Beam Irradiation on the Thermal Properties, Fatigue Life and Natural Weathering of Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber Blends,Materials& Design,32,(6),3336-3346

33. Rashid, Erfan Suryani Abdul; Rasyid, Mohd Fadli Ahmad; Akil, Hazizan Md;Ariffin K.;Kooi C.C.,(2011), Effect of Ion Exchange Treatment on the Properties of Muscovite Filled Epoxy Composite,Applied Clay Science,52,(3),295-300

34. Khalil, H. P. S. Abdul; Marliana, M. M.; Issam, A. M.;Bakare I.O,(2011), Exploring Isolated Lignin Material From Oil Palm Biomass Waste In Green Composites,Materials & Design,32,(5),2604-2610

35. Nurdina, A. K.; Mariatti, M.; Samayamutthirian, P.,(2011), Effect of Filler Surface Treatment on Mechanical Properties and Thermal Properties of Single and Hybrid Filler-Filled PP Composites,Journal Of Applied Polymer Science,120,(2),857-865

36. Law, T. T.; Ishak, Z. A. Mohd.,(2011), Water Absorption and Dimensional Stability of Short Kenaf Fiber-Filled Polypropylene Composites Treated with Maleated Polypropylene,Journal Of Applied Polymer Science,120,(1),563-572

37. Ariffin, A.; Ariff, Z. M.; Jikan, S. S.,(2011), Evaluation On Extrudate Swell And Melt Fracture Of Polypropylene/Kaolin Composites At High Shear Stress,Journal Of Reinforced Plastics And Composites,30,(7),609-619

38. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin.,(2011), Mechanical Properties of Nanosilica/Polypropylene Composites Under Dynamic Compression Loading,Polymer Composites,32,(4),565-575

39. Idrus, Suhaida S.; Ismail, H.; Palaniandy, Samayamutthirian.,(2011), Study of The Effect of Different Shapes of Ultrafine Silica As Fillers In Natural Rubber Compounds.Polymer Testing.30,(2),251-259

40. Rozman, H. D.; Musa, L.; Azniwati, A. A.;Rozyanty A.R.,(2011), Tensile Properties of Kenaf/Unsaturated Polyester Composites Filled with a Montmorillonite Filler,Journal Of Applied Polymer SciencE,119,(5),2549-2553

41. Bhat, Irshad-Ul-Haq; Khalil, H. P. S. Abdul; Fazita, M. R. Nurul;Abdullah C.K.,(2011), Hybridized Biocomposites from Agro-Wastes: Mechanical, Physical and Thermal Characterization,Journal Of Polymers And The Environment,19,(1),49-58

42. Jawaid, M.; Khalil, H. P. S. Abdul; Khanam, P. Noorunnisa;Abu Bakar A.,(2011), Hybrid Composites Made from Oil Palm Empty Fruit Bunches/Jute Fibres: Water Absorption, Thickness Swelling and Density Behaviours,Journal Of Polymers And The Environment,19,(1),106-109

43. Thirmizir, M. Z. Ahmad; Ishak, Z. A. Mohd; Taib, R. Mat;Rahim S.;Jani S.M.,(2011), Natural Weathering of Kenaf Bast Fibre-Filled Poly(Butylene Succinate) Composites: Effect of Fibre Loading and Compatibiliser Addition,Journal Of Polymers And The Environment,19,(1),263-273

44. Kudus, Muhammad Helmi Abdul; Akil, Hazizan Md.; Mohamad, Hasmaliza;Loon L.E.,(2011), Effect of Catalyst Calcination Temperature on the Synthesis of MWCNT-Alumina Hybrid Compound Using Methane Decomposition Method,Journal Of Alloys And Compound,509,(6),2784-2788

45. Jawaid, M.; Khalil, H. P. S. Abdul; Abu Bakar, A.;Khanam P.N.,(2011), Chemical Resistance, Void Content And Tensile Properties Of Oil Palm/Jute Fibre Reinforced Polymer Hybrid Composites,Materials & Design,32,(2),1014-1019

46. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin.,(2011), Static and Dynamic Compressive Properties Of Mica/Polypropylene Composites,Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing,528,(3),1567-1576

47. Rahim, N. A. Abdul; Ariff, Z. M.; Ariffin, A.;Jikan S.S.,(2011), Study on Effect of Filler Loading on the Flow and Swelling Behaviors of Polypropylene-Kaolin Composites Using Single-Screw Extruder,Journal Of Applied Polymer Science,119,(1),73-83

48. Bhat, A. H.; Khalil, H. P. S. Abdul; Bhat, Irshad-ul-Haq;Banthia A.K.,(2011), Development and Characterization of Novel Modified Red Mud Nanocomposites Based on Poly(hydroxy ether) of Bisphenol A,Journal Of Applied Polymer Science,119,(1),515-522

49. Julkapli, Nurhidayatullaili Muhd; Akil, Hazizan Md; Ahmad, Zulkifli.,(2011), Preparation, Properties and Applications of Chitosan-Based Biocomposites/Blend Materials: A Review,Composite Interfaces,18,(6),449-50

50. Cao, Xuan Viet; Ismail, Hanafi; Rashid, Azura A.;Takeichi T.;Thao V.H.,(2011), Mechanical Properties And Water Absorption Of Kenaf Powder Filled Recycled High Density Polyethylene/Natural Rubber Biocomposites Using Mape As A Compatibilizer,Bioresources,6,(3),3260-3271

51. Zainal, Z.; Ismail, H.,(2011), The Effects of Short Glass Fibre (SGF) Loading and a Silane Coupling Agent on Properties of Polypropylene/Waste Tyre Dust/Short Glass Fibre (PP/WTD/SGF) Composites,Polymer-Plastics Technology And Engineering,50,(3),297-305

52. Sam, S. T.; Ismail, H. Ahmad, Z.,(2011), Soil Burial of Polyethylene-g-(Maleic Anhydride) Compatibilised LLDPE/Soya Powder Blends,Polymer-Plastics Technology And Engineering,50,(8),851-861 Article Number:PII 938465489

53. Ismail, Hanafi; Mahir, Norjulia Ahmad; Ahmad, Zulkifli.,(2011), The Effect of Bis-(3-triethoxysilylpropyl) Tetrasulphide (Si-69) as a Coupling Agent on Properties of Natural Rubber/Kenaf Fibre Composites,Polymer-Plastics Technology And Engineering,50,(9),893-897 Article Number: PII 938465434

54. Ismail, H.; Ramly, A. F.; Othman, N.,(2011), The Effect of Carbon Black/Multiwall Carbon Nanotube Hybrid Fillers on the Properties of Natural Rubber Nanocomposites,Polymer-Plastics Technology And Engineering,50,(7), 660-666 Article Number: PII 937914292

55. Ismail, Hanafi; Salleh, Siti Zuliana; Ahmad, Zulkifli.,(2011), Curing Characteristics, Mechanical, Thermal, and Morphological Properties of Halloysite Nanotubes (HNTs)-Filled Natural Rubber Nanocomposites,Polymer-Plastics Technology And Engineering,50,(7),681-688 Article Number: PII 937917842

56. Zhong, Ooi Xian; Ismail, Hanafi; Aziz, Nor Aziah Abdul;Abu Bakar A.,(2011), Preparation and Properties of Biodegradable Polymer Film Based on Polyvinyl Alcohol and Tropical Fruit Waste Flour,Polymer-Plastics Technology And Engineering,50,(7),705-711 Article Number: PII 937914795

57. Wahab, Mohamad Kahar Abdul; Ismail, Hanafi; Othman, Nadras.,(2011), Characterization of Citric Acid-Modified Tapioca Starch and its Influence on Thermal Behavior and Water Absorption of High Density Polyethylene/Natural Rubber/Thermoplastic Tapioca Starch Blends,Polymer-Plastics Technology And Engineering,50,(7),748-753 Article Number: PII 937916861

58. Ariffin, A.; Ahmad, M. S. B.,(2011), Review: Single Screw Extruder in Particulate FillerComposite,Polymer-Plastics Technology And Engineering,50(4),395-403 Article Number: PII 934302691

59. Supri, A. G.; Ismail, H.,(2011), The Effect of Isophorone Diisocyanate-Polyhydroxyl Groups Modified Water Hyacinth Fibers (Eichhornia Crassiper) on Properties of Low Density Polyethylene/Acrylonitrile Butadiene Styrene (LDPE/ABS) Composites,Polymer-Plastics Technology And Engineering,50,(2),113-120 Article Number: PII 93255899

60. Tay, G. S.; Shannon-Ong, S. H.; Goh, S. W.;Rozaman H.D.,(2011), Enhancement of Tensile and Impact Properties of Thermoplastic Lignocellulose Composites by Incorporation of Chemically Treated Alcell Lignin as Compatibilizer,Polymer-Plastics Technology And Engineering,50,(2,160-167 Article Number: PII 932559060

61. Lim, S. R.; Chow, W. S.,(2011), Fracture Toughness Enhancement of Epoxy by Organo-Montmorillonite,Polymer-Plastics Technology And Engineering,50,(2),182-189 Article Number: PII 932558451

62. Issam, A. M.; Shilla, M. N.; Khalil, H. P. S. Abdul.,(2011), Effect of Methylene Spacers of Unsaturated Polyester Resins on the Properties of Composites Based on Oil Palm Empty Fruit Bunches and Fiberglass,Advanced Composite Materials,20,(1),1-12

63. Safiee, Sahnizam; Akil, Hazizan Md; Mazuki, Adlan Akram Mohammad;Ishak Z.A.M.;Abu Bakar A.,(2011), Properties of Pultruded Jute Fiber Reinforced Unsaturated Polyester Composites,Advanced Composite Materials,20,(3),231-244

64. Nosbi, Norlin; Akil, Hazizan Md; Ishak, Z. A. Mohd; Bakar A.A.,(2011), Effect Of Water Absorption On The Mechanical Properties Of Pultruded Kenaf Fibre Reinforced Polyester Composites,Advanced Composites Letters,20,(1),21-26

65. Nosbi, Norlin; Akil, Hazizan Md; Ishak, Z. A. Mohd;Abu Bakar A.,(2011), Behavior Of Kenaf Fibers After Immersion In Several Water Conditions,Bioresources,6,(2),950-960

66. Khalil, H. P. S. Abdul; Jawaid, M.; Abu Bakar, A.,(2011), Woven Hybrid Composites: Water Absorption And Thickness Swelling Behaviours,Bioresources,6,(2),1043-1052

67. Khalil, H. P. S. Abdul; Suraya, N. L.,(2011), Anhydride Modification Of Cultivated Kenaf Bast Fibers: Morphological, Spectroscopic, And Thermal Studies,Bioresources,6,(2),1122-1135

68. Bhat, A. H.; Khalil, H. P. S. Abdul,(2011), Exploring "Nano Filler" Based On Oil Palm Ash In Polypropylene Composites,Bioresources,6,(2),1288-1297

69. Jawaid, M.; Khalil, H. P. S. Abdul.,(2011), Effect Of Layering Pattern On The Dynamic Mechanical Properties And Thermal Degradation Of Oil Palm-Jute Fibers Reinforced Epoxy Hybrid Composite,Bioresources,6,(3 ),2309-2322

70. Santiagoo, Ragunathan; Ismail, Hanafi; Hussin, Kamarudin.,(2011), Mechanical Properties, Water Absorption, And Swelling Behaviour Of Rice Husk Powder Filled Polypropylene/Recycled Acrylonitrile Butadiene Rubber (Pp/Nbrr/Rhp) Biocomposites Using Silane As A Coupling Agent,Bioresources,6,(4),3714-3726

71. Ismail, Hanafi; Omar, Nurul Farhana; Othman, Nadras.,(2011), The Effect Of Kenaf Fibre Loading On Curing Characteristics And Mechanical Properties Of Waste Tyre Dust/Kenaf Fibre Hybrid Filler Filled Natural Rubber Compounds, Bioresources,6,(4),3742-3756

72. Bhat, Irshad-ul-Haq; Khalil, H. P. S. Abdul; Ismail, H.;Alshammari T.,(2011), Morphological, Spectroscopic, And Thermal Properties Of Alkali-Treated And Chemically Modified Oil Palm Empty Fruit Bunch Fibers And Oil Palm Frond Fibers: A Comparative Study, Bioresources,6,(4),4673-4685

73. Khalil, H. P. S. Abdul; Marliana, M. M.; Alshammari, Turki.,(2011), Material Properties Of Epoxy-Reinforced Biocomposites With Lignin From Empty Fruit Bunch As Curing Agent,Bioresources,6,(4),5206-5223

74. Mazuki, Adlan Akram Mohamad; Akil, Hazizan Md; Safiee, Sahnizam; Ishak Z.A.M.;Abu Bakar A.,(2011), Degradation of Dynamic Mechanical Properties of Pultruded Kenaf Fiber Reinforced Composites After Immersion In Various Solutions,Composites Part B-Engineering,42,(1),71-76

75. Bhat, A. H.; Bhat, Irshad-ul-Haq; Khalil, H. P. S. Abdul;Mishra R.K.;Datt M.;Banthia A.K.,(2011), Development and Material Properties of Chitosan and Phosphomolybdic Acid-based Composites,Journal Of Composite Materials,45,(1),39-49

76. Khalil, H. P. S. Abdul; Fazita, M. R. Nurul; Jawaid, M.;Bhat A.H.;Abdullah C.K.,(2011), Empty Fruit Bunches as a Reinforcement in Laminated Bio-composites,Journal Of Composite Materials,45,(2),219-236

77. Suriati, G.; Mariatti, M.; Azizan, A.,(2011), Effects of Filler Shape And Size On The Properties Of Silver Filled Epoxy Composite For Electronic Applications,Journal Of Materials Science-Materials In Electronics,22,(1),56-63

78. Ariffin, A.; Ariff, Z. M.; Jikan, S. S.,(2011), Evaluation on Nonisothermal Crystallization Kinetics of Polypropylene/Kaolin Composites By Employing Dobreva and kissinger methods,Journal Of Thermal Analysis And Calorimetry,103,(1),171-177

79. Khalil, H. P. S. Abdul; Bakare, I. O.; Khairul, A.;Issam A.M.;Bhat I.U.,(2011), Effect of Anhydride Modification on the Thermal Stability of Cultivated Acacia mangium,Journal Of Wood Chemistry And Technology,31,(2),154-171 Article Number: PII 937211047

80. Thirmizir, M. Ahmad; Ishak, Z. Mohd; Taib, R. Mat;Sudin R.;Leong Y.W.,(2011), Mechanical, Water Absorption and Dimensional Stability Studies of Kenaf Bast Fibre-Filled Poly(butylene succinate) Composites,Polymer-Plastics Technology And Engineering, 50,(4),339-348 Article Number: PII 93418433

81. Mahmoud, A. H.; Tay, G. S.; Rozman, H. D.,(2011), A Preliminary Study on Ultraviolet Radiation-Cured Unsaturated Polyester Resin Based on Palm Oil,Polymer-Plastics Technology And Engineering,50,(6),573-580 Article Number: PII 936632005

82. Aziz, Azizan Abd; Akil, Hazizan Md; Jamaludin, Syed Mustafa Syed; et al.,(2011), The Effect of Multiple Compatibilizers on the Impact Properties of Polypropylene/Polystyrene (PP/PS) Blend,Polymer-Plastics Technology And Engineering,50,(8),768-775 Article Number: PII 938491463

83. Ismail, H.; Mathialagan, M.,(2011), Curing Characteristics, Morphological, Tensile and Thermal Properties of Bentonite-Filled Ethylene-Propylene-Diene Monomer (EPDM) Composites,Polymer-Plastics Technology And Engineering,50,(14),1421-1428
1. Voo, Richard; Mariatti, M.; Sim, L. C.;(2012), Thermal Properties And Moisture Absorption of Nanofillers-Filled Epoxy Composite Thin Film for Electronic Application,Polymers For Advanced Technologies,23,(12),1620-1627



2. Saw, L. N.; Mariatti, M.; Azura, A. R.;Azizan A.;Kim,J.K.;(2012), transparent, Electrically Conductive, and Flexible Films Made From Multiwalled Carbon Nanotube/Epoxy Composites,Composites Part B-Engineering,43,(8),2973-2979



3. Voo, Richard; Mariatti, M.; Sim, L. C.;(2012), Flexibility improvement of Epoxy Nanocomposites Thin Films Using Various Flexibilizing Additives,Composites Part B-Engineering,43,(8),3037-3043



4. Khalil, H. P. S. Abdul; Bhat, I. U. H.; Jawaid, M.;Zaidon A.;Hermawan D.;Hadi Y.S.;(2012), Bamboo Fibre Reinforced Biocomposites: A Review ,Materials & Design,42,353-368



5. Santiagoo, Ragunathan; Ismail, Hanafi; Hussin, Kamarudin.,(2012), Effects of Acetic Anhydride on the Properties of Polypropylene(PP)/Recycled Acrylonitrile Butadiene(NBRr)/Rice Husk Powder(RHP) Composites,Polymer-Plastics Technology And Engineering,51,(15),1505-1512


6. Ramasamy, Shamala; Ismail, Hanafi; Munusamy, Yamuna.,(2012), Tensile and Morphological Properties of Rice Husk Powder Filled Natural Rubber Latex Foam,Polymer-Plastics Technology And Engineering,51(15)1524-1529




7. Mathialagan, M.; Ismail, H.;(2012), Optimization and Effect of 3-Aminopropyltriethoxysilane Content on The Properties of Bentonite-Filled Ethylene Propylene Diene Monomer Composites,Polymer Composites,33,(11),1993-2000

8. Kong, K. T. S.; Mariatti, M.; Rashid, A. A.;Busfield J.J.C.;(2012), Effect of Processing Methods and Functional Groups on the Properties of Multi-Walled Carbon Nanotube Filled Poly(Dimethyl Siloxane) Composites,Polymer Bulletin,69,(8),937-953

9. Fong, K. Y.; Mariatti, M.; Takagi, H.;(2012),Effect of Matrix and Staking Sequence of Recycled Jute/Carbon Fiber Hybrid Laminated Composites,Journal Of Polymer Materials,29,(4),437-449

10. Du Ngoc Uy Lan; Abu Bakar, A.; Azahari, Baharin;Ariff Z.M.;Chujo Y.,(2012), Effect of Interlocking Between Porous Epoxy Microparticles and Elastomer on Mechanical Properties and Deformation Modes,Polymer Testing,31,(7),931-937

11. Izmar, M. H.; Afiq, M. M.; Azura, A. R.,(2012), Effects of Different Additions of Sago Starch Filler on Physical and Biodegradation Properties of Pre-Vulcanized NR Latex Composites,Composites Part B-Engineering,43(7),2746-2750

12. Othman, Muhammad Bisyrul Hafi; Ramli, Rafiza; Ariff, Zulkifli Mohamad;Akil H.M.;Ahmad Z.,(2012), Thermal Properties of Polyimide System Containing Silicone Segments,Journal Of Thermal Analysis And Calorimetry,109,(3),1515-1523

13. Lim, W. K. Patrick; Mariatti, M.; Chow, W. S.;Mar K.T.,(2012), Thermal and Flame Properties of Calcium Borate and Intumescent Ammonium Polyphosphate in Epoxy/Glass Fiber Composites,Journal Of Fire Sciences,30,(5),428-436

14. Hamizah, A. S.; Mariatti, M.; Othman, R.;Kawashita M.;Hayati A.R.N.,(2012),Mechanical and Thermal Properties of Polymethylmethacrylate Bone Cement Composites Incorporated with Hydroxyapatite and Glass-Ceramic Fillers,Journal Of Applied Polymer Science,125(Special Issue:SI Supplement: 1),E661-E669

15. Kudus, Muhammad Helmi Abdul; Akil, Hazizan Md; Rasyid, Mohd Fadli Ahmad,(2012), Muscovite-MWCNT hybrid as a Potential Filler for Layered Silicate Nanocomposite,Materials Letters,79,92-95

16. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar;Aziz N.A.A.,(2012), Properties of the Crosslinked Plasticized Biodegradable Poly(Vinyl Alcohol)/Rambutan Skin Waste Flour Blends,Journal Of Applied Polymer Science,125,(2),1127-1135

17. Tay, G. S.; Ong, L. N.; Rozman, H. D.,(2012), Mechanical Properties and Fire Retardant Behavior of Polyurethane Foam Reinforced With Oil Palm Empty Fruit Bunch,Journal Of Applied Polymer Science,125,(1),158-164

18. Kahar, A. W. M.; Ismail, H.; Othman, N.,(2012), Morphology and tensile properties of high-density polyethylene/natural rubber/thermoplastic tapioca starch blends: The effect of citric acid-modified tapioca starch,Journal Of Applied Polymer Science,125,(1),768-775

19. Firdaus, S. Muhammad; Mariatti, M.,(2012),fabrication and Characterization of Nano Filler-Filled Epoxy Composites for Underfill Application,Journal Of Materials Science-Materials In Electronics,23,(7),1293-1299

20. Rozman, H. D.; Mulisa, A. Sobra; Tay, G. S.,(2012), A Comparison Study of Lignocellulosic-Thermoplastic Composites Prepared From Different Compounding Techniques,Journal Of Applied Polymer Science,124,(6),4547-4553

21. Khalil, H. P. S. Abdul; Amouzgar, P.; Jawaid, M.;Hassan A.;Ahmad F.;Hadiyana A.;Dungani R.,(2012), New Approach to Oil Palm Trunk Core Lumber Material Properties Enhancement via Resin Impregnation,Journal Of Biobased Materials And Bioenergy,6,(3),299-308

22. Nordin, Razif; Ismail, Hanafi; Ahmad, Zukifli;Rashid A.,(2012), Performance Improvement of (Linear Low-Density Polyethylene)/Poly(Vinyl Alcohol) Blends by In Situ Silane Crosslinking,Journal Of Vinyl & Additive Technology,18,(2),120-128

23. Zaharri, Nur Diyana; Othman, Nadras; Ishak, Zainal Ariffin Mohd.,(2012), Effects of Peroxide Crosslinking on the Mechanical And Morphological Properties of Poly(Ethylene-Co-Vinyl Acetate)/Zeolite Composites,Journal Of Vinyl & Additive Technology,18,(2),129-138

24. Nabil, Hayeemasae; Ismail, Hanafi; Rashid, Azura Abdul.,(2012), Effects of Partial Replacement of Commercial Fillers by Recycled Poly(Ethylene Terephthalate) Powder on the Properties Of Natural Rubber Composites,Journal Of Vinyl & Additive Technology,18,(2),139-146

25. Bhat, A. H.; Khalil, H. P. S. A.; Bhat, Irshad ul Haq;Banthia A.K.,(2012), Dielectric and Material Properties of Poly (Vinyl Alcohol): Based Modified Red Mud Polymer Nanocomposites,Journal Of Polymers And The Environment,20,(2),395-403

26. Nadirah, W. O. Wan; Jawaid, M.; Al Masri, Abeer A.;Khalill H.P.S.A.;Suhaily S.S.;Mohamed A.R.,(2012), Cell Wall Morphology, Chemical and Thermal Analysis of Cultivated Pineapple Leaf Fibres for Industrial Applications,Journal Of Polymers And The Environment,20,(2),404-411

27. Rahim, Tuan Noraihan Azila Tuan; Mohamad, Dasmawati; Akil, Hazizan Md;Ab Rahman I.,(2012), Water Sorption Characteristics of Restorative Dental Composites Immersed In Acidic Drinks,Dental Materials,28,(6),E63-E70

28. Chow, W. S.; Leu, Y. Y.; Ishak, Z. A. Mohd.,(2012), Effects of SEBS-G-MAH on the Properties of Injection Moulded Poly(Lacticacid)/Nano-Calcium Carbonate Composites,Express Polymer Letters,6,(6),503-510

29. Leu, Y. Y.; Ishak, Z. A. Mohd; Chow, W. S.,(2012), Mechanical, Thermal, and Morphological Properties of Injection Molded Poly(Lactic Acid)/SEBS-g-MAH/Organo-Montmorillonite Nanocomposites,Journal Of Applied Polymer Science,124,(2),1200-1207

30. Yusriah, L.; Sapuan, S. M.; Zainudin, E. S.;Mariatti M.,(2012), Underutilized Malaysian Agro-wastes Fiber as Reinforcement in Polymer Composites: Potential and Challenges,Journal Of Polymer Materials,29,(2),201-216

31. Chou, P. M.; Mariatti, M.; Zulkifli, A.;Sreekantan S.,(2012), Evaluation of the Flexural Properties and Bioactivity Of Bioresorbable PLLA/PBSL/CNT and PLLA/PBSL/TiO2 Nanocomposites,Composites Part B-Engineering, 43,(3),1374-1381

32. Tan, C. Y.; Akil, Hazizan Md.,(2012), Impact Response of Fiber Metal Laminate Sandwichcomposite Structure with Polypropylene Honeycomb Core,Composites Part B-Engineering,43,(3),1433-1438

33. Saw, W. P. Serena; Mariatti, M.,(2012), Properties of Synthetic Diamond and Graphene Nanoplatelet-Filled Epoxy Thin Film Composites for Electronic Applications,Journal Of Materials Science-Materials In Electronics,23,(4),817-824

34. Osman, H.; Ismail, H.; Mariatti, M.,(2012), Polypropylene/Natural Rubber Composites Filled with Recycled Newspaper: Effect of Chemical Treatment Using Maleic Anhydride-Grafted Polypropylene and 3-Aminopropyltriethoxysilane,Polymer Composites,33,(4),609-618

35. Norkhairunnisa, M.; Azizan, A.; Mariatti, M.;Ismail H.;Sim L.C.,(2012), Thermal Stability and Electrical Behavior of Polydimethylsiloxane Nanocomposites with Carbon Nanotubes and Carbon Black Fillers,Journal Of Composite Materials,46,(8),903-910

36. Ismail, H.; Mathialagan, M.,(2012), Comparative Study on the Effect of Partial Replacement of Silica or Calcium Carbonate by Bentonite On the Properties Of EPDM Composites,Polymer Testing,31,(2),199-208

37. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin.,(2012), Effect of Molecular Structures on Dynamic Compression Properties of Polyethylene,Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing,538,125-134

38. Ismail, H.; Othman, N.; Komethi, M.,(2012), Curing Characteristics and Mechanical Properties of Rattan-Powder-Filled Natural Rubber Composites as a Function of Filler Loading and Silane Coupling Agent,Journal Of Applied Polymer Science,123,(5),2805-2811

39. Lim, W. K. Patrick; Mariatti, M.; Chow, W. S.;Mar K.T.,(2012), Effect of Intumescent Ammonium Polyphosphate (APP) and Melamine Cyanurate (MC) on the Properties of Epoxy/Glass Fiber Composites,Composites Part B-Engineering,43,(2),124-128

40. Chow, W. S.; Tham, W. L.; Ishak, Z. A. Mohd.,(2012), Improvement of Microstructure and Properties of Poly(methyl methacrylate)/Hydroxyapatite Composites Treated with Zirconate Coupling Agent,Journal Of Thermoplastic Composite Materials,25,(2),165-180

41. Hidayah, I. Nurul; Mariatti, M.,(2012), Properties of Single and Hybrid Aluminum and Silver Fillers Filled High-Density Polyethylene Composites,Journal Of Thermoplastic Composite Materials,25,(2),209-221

42. Boon, M. S.; Saw, W. P. Serena; Mariatti, M.,(2012), Magnetic, Dielectric and Thermal Stability of Ni-Zn Ferrite-Epoxy Composite Thin Films for Electronic Applications,Journal Of Magnetism And Magnetic Materials,324,(5),755-760

43. Jawaid, M.; Khalil, H. P. S. Abdul; Alattas, Omar S.,(2012), woven Hybrid Biocomposites: Dynamic Mechanical and Thermal Properties,Composites Part A-Applied Science And Manufacturing,43,(2),288-293

44. Khalil, H. P. S. Abdul; Bhat, A. H.; Yusra, A. F. Ireana.,(2012), green Composites From Sustainable Cellulose Nanofibrils: A review,Carbohydrate Polymers,87,(2),963-979

45. Hussein, M. A.; Tay, G. S.; Rozman, H. D.,(2012), Photo-Fabricated Unsaturated Polyester Resin Composites Reinforced by Kenaf Fibers, Synthesis and Characterization,Journal Of Applied Polymer Scienc,123,(2),968-976

46. Muniandy, Komethi; Ismail, Hanafi; Othman, Nadras.,(2012), Effects Of Partial Replacement Of Rattan Powder By Commercial Fillers On The Properties Of Natural Rubber Composites,Bioresources,7(4),4640-4657

47. Balakrishna, Nurshamila Shaari; Ismail, Hanafi; Othman, Nadras.,(2012), The Effects Of Rattan Filler Loadings On Properties Of Rattan Powder-Filled Polypropylene Composites,Bioresources,7(4),5677-5690

48. Abdullah, C. K.; Jawaid, M.; Khalil, H. P. S. Abdul; et al., Oil Palm Trunk Polymer Composite: Morphology, Water Absorption, And Thickness Swelling Behaviours,Bioresources,7(3),2948-2959

49. Muniandy, Komethi; Ismail, Hanafi; Othman, Nadras.,(2012), Studies On Natural Weathering Of Rattan Powder-Filled Natural Rubber Composites,Bioresources7(3),3999-4011

50. Suhaily, S. S.; Jawaid, M.; Khalil, H. P. S. Abdul;Zaidon A.;Hadiyane A.,(2012), A Review Of Oil Palm Biocomposites For Furniture Design And Applications: Potential And Challenges,Bioresources,7,(3),4400-4423

51. Chang, Siang Yee; Ismail, Hanafi; Ahsan, Qumrul.,(2012)., Effect Of Maleic Anhydride On Kenaf Dust Filled Polycaprolactone/Thermoplastic Sago Starch Composites,Bioresources,7(2),1594-1616

52. Jawaid, M.; Khalil, H. P. S. Abdul; Hassan, A.;Abdallah E.,(2012), Bi-Layer Hybrid Biocomposites: Chemical Resistant And Physical Properties,Bioresources,7(2),2344-2355

53. Xuan Viet Cao; Ismail, Hanafi; Rashid, Azura A.;Takeichi T.;Thao V.H.,(2012), Maleated Natural Rubber as a Coupling Agent for Recycled High Density Polyethylene/Natural Rubber/Kenaf Powder Biocomposites,Polymer-Plastics Technology And Engineering,51(9),902-908

54. Nguyen Quang Duy; Rashid, Azura A.; Ismail, Hanafi.,(2012)., Effects of Filler Loading and Different Preparation Methods on Properties of Cassava Starch/Natural Rubber Composites,Polymer-Plastics Technology And Engineering,51(9),938-942

55. Nuraya, A. S. Siti; Baharin, A.; Azura, A. R.;Hakim M.H.M.R.;Mazlan I.;Adnan M.;Nooraziah A.A.,(2012),Reinforcement of Prevulcanised Natural Rubber Latex Films by Banana Stem Powder and Comparison with Silica and Calcium Carbonate,Journal Of Rubber Research,15,(2),124-140

56. Ismail, Hanafi; Muniandy, Komethi; Othman, Nadras.,(2012) Fatigue Life, Morphological Studies, And Thermal Aging Of Rattan Powder-Filled Natural Rubber Composites As A Function Of Filler Loading And A Silane Coupling Agent,Bioresources,7(1),841-858

57. Muniandy, Komethi; Ismail, Hanafi; Othman, Nadras.,(2012), Biodegradation, Morpholgical, And Ftir Study Of Rattan Powder-Filled Natural Rubber Composites As A Function Of Filler Loading And A Silane Coupling Agent, Bioresources,7(1),957-971


58. Supri, A. G.; Ismail, H.,(2012), Effect of Vinyl Alcohol-Phthalic Anhydride on Properties of Low Density Polyethylene (LDPE)/Tyre Dust (TD) Composites,Polymer-Plastics Technology And Engineering,51(6),549-555
59. Attharangsan, Supalak; Ismail, Hanafi; Abu Bakar, Mohamad;Ismail J.,(2012), Carbon Black (CB)/Rice Husk Powder (RHP) Hybrid Filler-Filled Natural Rubber Composites: Effect of CB/RHP Ratio on Property of the Composites,Polymer-Plastics Technology And Engineering,51,(7),655-662

60. Tay, G. S.; Azniwati, A. A.; Azizah, A. B.;Rozman H.D.;Musa L.,(2012), The Flexural and Impact Properties of Kenaf-Polypropylene Composites Filled with Montmorillonite Filler,Polymer-Plastics Technology And Engineering,51,(2),208-213

61. Attharangsan, Supalak; Ismail, Hanafi; Abu Bakar, Mohamad;Ismail J.,(2012),The Effect of Rice Husk Powder on Standard Malaysian Natural Rubber Grade L (SMR L) and Epoxidized Natural Rubber (ENR 50) Composites,Polymer-Plastics Technology And Engineering,51,(3),231-237

62. Kahar, Mohamad; Wahab, Abdul; Ismail, Hanafi;Othman N.,(2012), Compatibilization Effects of PE-g-MA on Mechanical, Thermal and Swelling Properties of High Density Polyethylene/Natural Rubber/Thermoplastic Tapioca Starch Blends,Polymer-Plastics Technology And Engineerin,51,(3),298-303

63. Julkapli, Nurhidayatullaili Muhd; Akil, Hazizan Md; Ahmad, Zulkifli.,(2012), Evaluation of Cross-Linked Chitosan as Filler on Mechanical Properties of Chitosan-Based Bio-Composites,Polymer-Plastics Technology And Engineering,51(4),333-339

64. Ghani, Supri Abdul; Feng, Yow Zheng; Ismail, Hanafi.,(2012), Properties of Tyre Dust-Filled Low Density Polyethylene Composites: The Effect of Phthalic Anhydride,Polymer-Plastics Technology And Engineering,51(4),358-363

65. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar;Aziz N.A.A.,(2012), The Comparison Effect of Sorbitol and Glycerol as Plasticizing Agents on the Properties of Biodegradable Polyvinyl Alcohol/Rambutan Skin Waste Flour Blends,Polymer-Plastics Technology And Engineering,51,(4),432-437

66. Zamri, Mohd Hafiz; Akil, Hazizan Md; Abu Bakar, Azhar;Ishak Z.A.M.;Cheng L.W.,(2012), Effect of Water Absorption On Pultruded Jute/Glass Fiber-Reinforced Unsaturated Polyester Hybrid Composites,Journal Of Composite Materials,46,(1),51-61

67. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin;Mahmud S.,(2012), The Effect of Loading Rates and Particle Geometry on Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites: Experimental and Numerical Prediction.,Polymer Composites,33(1),99-108

1. Muniyadi, Mathialagan; Ismail, Hanafi(2013), Thermal Aging of Bentonite-Filled Ethylene Propylene Diene Monomer Composites,Journal Of Applied Polymer Science,130,(6),4419-4427



2. Khalil, H. P. S. Abdul; Suraya, N. L.; Atiqah, N.; Jawaid, M.; Hassan, A.;(2013), Mechanical And Thermal Properties of Chemical Treated Kenaf Fibres Reinforced Polyester Composites,Journal Of Composite Materials,47,(26),3343-3350



3. Khalil, H. P. S. Abdul; Amouzgar, P.; Jawaid, M.; Abdullah, C. K.; (Issam, A. M.; Zainudin, E. S.; Zainudin, E. S.; (Hassan, A,(2013), Physical and Thermal Properties of Microwave-Dried Wood Lumber Impregnated With Phenol Formaldehyde Resin,Journal Of Composite Materials,47,(28),3565-3571



4. Rozman, H. D.; Shannon-Ong, S. H.; Azizah, A. B.; Tay, G. S.,(2013), Preliminary Study of Non-woven Composite: Effect of Needle Punching and Kenaf Fiber Loadings on Non-woven Thermoplastic Composites Prepared From Kenaf and Polypropylene Fiber,Journal Of Polymers And The Environment,21,(4),032-1039



5. Bhat, Rajeev; Abdullah, Nurulismah; Din, Rozman Hj; Tay, G.S,(2013), producing Novel Sago Starch Based Food Packaging Films By Incorporating Lignin Isolated From Oil Palm Black Liquor Waste,Journal Of Food Engineering,119,(4),707-713



6. Jawaid, M.; Alothman, Othman Y.; Paridah, M. T.; Khalil, HPSA,(2013), Effect of Fiber Treatment on Dimensional Stability and Chemical Resistance Properties of Hybrid Composites,International Journal Of Polymer Analysis And Characterization,18(8),608-616



7. Ismail, Hanafi; Irani, Maryam; Ahmad, Zulkifli(2013), Superabsorbent Hydrogels Prepared From Waste Polystyrene And Linear Low-Density Polyethylene,Journal Of Elastomers And Plastic,45,(6),536-550



8. Chow, W. S.; Tham, W. L.; Seow, P. C.,(2013), Effects of Maleated-PLA Compatibilizer on the Properties of Poly(Lactic Acid)/Halloysite Clay Composites,Journal Of Thermoplastic Composite Materials,2(10),1349-1363



9. Zulfli, N. H. Mohd; Abu Bakar, A.; Chow, W. S.,(2013), Mechanical And Water Absorption Behaviors of Carbon Nanotube Reinforced Epoxy/Glass Fiber Laminates,Journal Of Reinforced Plastics And Composites,32,(22),1715-172



10. Afiq, M. M.; Azura, A. R.,(2013), Effect of Sago Starch Loadings On Soil Decomposition of Natural Rubber Latex (NRL) Composite Films Mechanical Properties,International Biodeterioration & Biodegradation,85,139-149



11. Supri, A. G.; Ismail, H.,(2013)Recycled High Density Polyethylene/Natural Rubber/Chicken Feather Fibers (RHDPE/NR/CFF) Composites: The Effect of Fiber Loading and Benzyl Urea,Polymer-Plastics Technology And Engineering,52,(13),1316-1322



12. Hamzah, M. S.; Mariatti, M.,(2013), Properties of Flame-Retardant Fillers in Polypropylene/Ethylene Propylene Diene Monomer Composites,Journal Of Thermoplastic Composite Materials,26,(9),1223-1236



13. Khalil, H. P. S. Abdul; Fizree, H. M.; Bhat, A. H.; Jawaid, M.;Abdullah, C.K.,(2013),Development And Characterization Of Epoxy Nanocomposites Based on Nano-Structured Oil Palm Ash,Composites Part B-Engineering,53,324-333



14. Thirmizir, M. Z. Ahmad; Ishak, Z. A. Mohd; Taib, R. Mat; Rahim, S.,(2013), Effect of Water Exposure On Dimensional Stability And Mechanical Properties Of Unpurifed And Purified Maleated Poly(Butylene Succinate) Compatibilised Poly(Butylene Succinate)/Kenaf Bast Fibre Composites,Composite Interfaces,20,(7),469-482

15. Osman, M. R.; Akil, H. M.; Ishak, Z. A. Mohd,(2013), Effect of Hybridization on The Water Absorption Behaviour of Pultruded Kenaf Fibre-Reinforced Polyester Composites,Composite Interfaces,20,(7),517-528




16. Ismail, H.; Ahmad, H. S.,(2013), The Properties of Acrylonitrile-Butadiene Rubber (NBR) Composite with Halloysite Nanotubes (HNTs) and Silica or Carbon Black, Polymer-Plastics Technology And Engineering,52,(12),1175-1182

17. Pang, Ming-Meng; Pun, Meng-Yan; Ishak, Zainal Arifin Mohd.,(2013), Natural Weathering Studies of Biobased Thermoplastic Starch From Agricultural Waste/Polypropylene Blends, Journal Of Applied Polymer Science,129(6),3237-3246

18. Pang, Ming-Meng; Pun, Meng-Yan; Ishak, Zainal Arifin Mohd.,(2013), Degradation Studies During Water Absorption, Aerobic Biodegradation, and Soil Burial of Biobased Thermoplastic Starch From Agricultural Waste/Polypropylene Blends,Journal Of Applied Polymer Science,129,(6),3656-3664

19. Isa, M. T.; Ahmed, A. S.; Aderemi, B. O.; Taib, R. M.;Mohammed-Dabo,I.A.,(2013), Effect Of Fiber Type And Combinations on The Mechanical, Physical and Thermal Stability Properties of Polyester Hybrid Composites,Composites Part B-Engineering,52,217-223

20. Nabil, H.; Ismail, H.; Azura, A. R.,(2013), Effects of Virgin Ethylene-Propylene-Diene-Monomer and Its Preheating Time on The Properties of Natural Rubber/Recycled Ethylene-Propylene-Diene- Monomer Blends,Materials & Design,50,27-37

21. Ismail, H.; Salleh, S. Z.; Ahmad, Z.,(2013), Properties Of Halloysite Nanotubes-Filled Natural Rubber Prepared Using Different Mixing Methods,Materials & Design,50,790-797

22. Al-Tayeb, Mustafa Maher; Abu Bakar, B. H.; Ismail, Hanafi; Akil, H.M.,(2013), Effect of Partial Replacement of Sand By Fine Crumb Rubber on Impact Load Behavior of Concrete Beam: Experiment and Nonlinear Dynamic Analysis,Materials And Structures,46,(8),1299-1307

23. Khalil, H. P. S. Abdul; Firoozian, P.; Jawaid, M.; Akil, H. M.;Hassan, A.,(2013), Preparation of Activated Carbon Filled Epoxy Nanocomposites Morphological And Thermal Properties,Journal Of Thermal Analysis And Calorimetry,113,(2),623-631

24. Khalil, H. P. S. Abdul; Jawaid, M.; Firoozian, P.;Amjad, M.; Zainudin, E.; Paridah, M. T.,(2013), Tensile, Electrical Conductivity, and Morphological Properties of Carbon Black-Filled Epoxy Composites,Nternational Journal Of Polymer Analysis And Characterization,18,(5),329-338

25. Hussein, M. A.; Rozman, H. D.; Tay, G. S.,(2013), The Effect of Kenaf Fibre Loadings on the Properties of Uv-Cured Unsaturated Polyester Composites,Journal Of Reinforced Plastics And Composites,32,(14),1062-1071

26. Tay, G. S.; Shannon-Ong, S. H.; Goh, S. W.;Rozman, H. D.,(2013), Thermoplastic-Lignocellulose Composites Enhanced by Chemically Treated Alcell Lignin as Compatibilizer,Journal Of Thermoplastic Composite Materials,26,(6),733-746

27. Chang, Boon Peng; Akil, H. M.; Nasir, R. M.; Nurdijati, S.,(2013), Abrasive Wear Performance and Antibacterial Assessment of Untreated and Treated Zno-Reinforced Polymer Composite,Polymer Composites,34,(7),1020-1032

28. Julkapli, Nurhidayatullaili Muhd; Akil, Hazizan Md; Ahmad, Zulkifli.,(2013), Evaluation of Cross-Linked Chitosan As Filler For Thermal Properties Of Chitosan-Based Biocomposites,Polymer-Plastics Technology And Engineering,52,(8),806-813

29. Khalil, H. P. S. Abdul; Aprilia, N. A. Sri; Bhat, A. H.; Jawaid, M.; Paridah, M. T.; Rudi, D.,(2013), A Jatropha Biomass As Renewable Materials For Biocomposites And Its Applications,Renewable & Sustainable Energy Reviews,22,667-685

30. Jawaid, M.; Khalil, H. P. S. Abdul; Abu Bakar.;Hassan, Azman.; Dungani, R.,(2013), Effect of Jute Fibre Loading on The Mechanical and Thermal Properties of Oil Palm-Epoxy Composites,Journal Of Composite Materials,47,(13),1633-1641

31. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar.(2013), Optimisation of Oil Palm Ash As Reinforcement In Natural Rubber Vulcanisation: A Comparison Between Silica And Carbon Black Fillers,Polymer Testing,32,(4),625-630

32. Nabil, H.; Ismail, H.; Azura, A. R.,(2013), Comparison of Thermo-Oxidative Ageing And Thermal Analysis Of Carbon Black-Filled Nr/Virgin EPDM and NR/Recycled EPDM blends,Polymer Testing,32,(4),631-639

33. Chang, L. N.; Jaafar, M.; Chow, W. S.,(2013), Thermal Behavior and Flammability of Epoxy/Glass Fiber Composites Containing Clay and Decabromodiphenyl Oxide,Journal Of Thermal Analysis And Calorimetry,112,(3),1157-1164

34. Nurul, M. S.; Mariatti, M.,(2013), Effect of Thermal Conductive Fillers on the Properties of Polypropylene Composites,Journal Of Thermoplastic Composite Materials,26,(5),627-63

35. Lai, Choay-Mon; Rozman, Hj Din; Tay, Guan-Seng.,(2013), Palm Oil-Based Unsaturated Polyester: Activation Energy And Swelling Properties,Polymer Engineering And Science,53,(6),1138-1145

36. Mohd, T. B. M.; Bhat, I. U. H.; Mohmod, A. L.;Aditiawati, P.;Khalil, H.P.S.A.;(2013), Thermal and FT-IR Characterization of Gigantochloa levis and Gigantochloa scortechinii Bamboo, a Naturally Occurring Polymeric Composite,Journal Of Polymers And The Environment,21,(2),534-544

37. Ismail, H.; Ramly, A. F.; Othman, N.,(2013),Effects of Silica/Multiwall Carbon Nanotube Hybrid Fillers on the Properties of Natural Rubber Nanocomposites,Journal Of Applied Polymer Science,(4),2433-2438

38. Kahar, A. W. M.; Ismail, H.; Othman, N.,(2013), Properties Of Hva-2 Vulcanized High Density Polyethylene/Natural Rubber/Thermoplastic Tapioca Starch Blends,Journal Of Applied Polymer Science,128,(4),2479-2488

39. Khalil, H. P. S. Abdul; Jawaid, M.; Firoozian, P.; Zainudin, E. S .; Paridah, M. T.,(2013), Dynamic Mechanical Properties of Activated Carbon-Filled Epoxy Nanocomposites,International Journal Of Polymer Analysis And Characterization,18,(4),247-256

40. Irani, Maryam; Ismail, Hanafi; Ahmad, Zulkifli,(2013), Preparation and Properties of Linear Low-Density Polyethylene-G-Poly (Acrylic Acid)/Organo-Montmorillonite Superabsorbent Hydrogel Composites,Polymer Testing,32,(3),502-U309

41. Zulkarnain, M.; Mariatti, M.; Azid, I. A.,(2013), Effects of Hybrid Fillers Based On Micro- And Nano-Sized Silver Particles on The Electrical Performance of Epoxy Composites,Journal Of Materials Science-Materials In Electronics,(5),1523-1529

42. Bhat, A. H.; Khalil, H. P. S. Abdul; Varshney, S.; Banthia, A. K.,(2013), Dynamic Mechanical Analysis And Topological Studies of Phenoxy Reinforced With Modified Red Mud Waste Nanofiller Based Composites,Journal Of Composite Materials,47,(8),1019-1027

43. De Silva, R. T.; Pasbakhsh, Pooria; Goh, K. L.; Chai, Siang-Piao .;Ismail, H.,(2013),Physico-Chemical Characterisation of Chitosan/Halloysite Composite Membranes,Polymer Testing,32,(2),265-271

44. Nabil, H.; Ismail, H.; Azura, A. R.,(2013), Compounding, Mechanical and Morphological Properties of Carbon-Black-Filled Natural Rubber/Recycled Ethylene-Propylene-Diene-Monomer (NR/R-EPDM) Blends, Polymer Testing,32,(2),385-393

45. Thirmizir, M. Z. Ahmad; Ishak, Z. A. Mohd; Taib, R. Mat; Rahim, S.,(2013) Effect of Maleated Compatibiliser (PBS-g-MA) Addition on the Flexural Properties and Water Absorption of Poly(butylene succinate)/Kenaf Bast Fibre Composites,Sains Malaysia,42,(4),435-441

46. Low, L. F.; Abu Bakar, A.,(2013), Fracture Toughness and Impact Strength of Hollow Epoxy Particles-Toughened Polyester Composite,Sains Malaysia,42,(4),443-448

47. Majeed, K.; Jawaid, M.; Hassan, A.; Abu Bakar,;Khalil, H. P. S. Abdul.;Salema, A. A.;Inuwa, I.,(2013), Potential Materials For Food Packaging From Nanoclay/Natural Fibres Filled Hybrid Composites,Materials & Design,46,391-410

48. Ismail, Hanafi; Irani, Maryam; Ahmad, Zulkifli.,(2013), Utilization of Waste Polystyrene and Starch for Superabsorbent Composite Preparation,Journal Of Applied Polymer Science,127,(6),4195-4202

49. Noriman, N. Z.; Ismail, H.,(2013), Effect of Carbon Black/Silica Hybrid Filler on Thermal Properties, Fatigue Life, and Natural Weathering of SBR/Recycled NBR Blends,International Journal Of Polymeric Materials And Polymeric Biomaterials,62,(5),252-259

50. Khoo, W. S.; Ismail, H.; Ariffin, A.,(2013), Tensile, Swelling, and Oxidative Degradation Properties of Crosslinked Polyvinyl Alcohol/Chitosan/Halloysite Nanotube Composites,International Journal Of Polymeric Materials And Polymeric Biomaterials,62,(7),390-396

51. Khalil, H. P. S. Abdul; Tehrani, M. A.; Davoudpour, Y.; Bhat, A. H.; Jawaid, M.; Jawaid, M.,(2013), Natural fiber reinforced poly(vinyl chloride) composites: A review,Journal Of Reinforced Plastics And Composites,32,(5),330-356

52. Nurul, M. S.; Mariatti, M.,(2013), Effect of Hybrid Nanofillers on the Thermal, Mechanical, and Physical Properties of Polypropylene Composites,Polymer Bulletin,70,(3),871-884

53. Supri, A. G.; Tan, S. J.; Ismail, H.; Teh, P. L.,(2013), Enhancing Interfacial Adhesion Performance By Using Poly(Vinyl Alcohol) In (Low-Density Polyethylene)/(Natural Rubber)/(Water Hyacinth Fiber) Composites,Journal Of Vinyl & Additive Technology,9,(1),47-54

54. Ismail, Hanafi; Khoo, Wee Shen; Ariffin, Azlan.,(2013), Effects of Halloysite Nanotubes and Kaolin Loading on the Tensile, Swelling, And Oxidative Degradation properties of poly(vinyl alcohol)/chitosan blends,Journal Of Vinyl & Additive Technology,19,(1),55-64

55. Lee, J. M.; Ishak, Z. A. Mohd; Taib, R. Mat; Law, T. T.;Thirmizir, M.Z.A.;(2013), Mechanical, Thermal and Water Absorption Properties of Kenaf-Fiber-Based Polypropylene and Poly(Butylene Succinate) Composites,Journal Of Polymers And The Environment,21,(1),293-302

56. Ismail, H.; Salleh, S. Z.; Ahmad, Z.,(2013),Properties of Halloysite Nanotube (HNT) Filled SMR L and ENR 50 Nanocomposites,International Journal Of Polymeric Materials And Polymeric Biomaterials,62,(6),314-322

57. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin.,(2013), Particle size - Dependent on The Static And Dynamic Compression Properties of Polypropylene/Silica Composites,Materials & Design,4,539-547

58. Ismail, H.; Salleh, S. Z.; Ahmad, Z.,(2013),Fatigue and Hysteresis Behavior of Halloysite Nanotubes-Filled Natural Rubber (SMR L and ENR 50) Nanocomposites,Journal Of Applied Polymer Science,127,(4),3047-3052

59. Jawaid, M.; Khalil, H. P. S. Abdul; Hassan,Azman.; Dungani, Rudi .;Hadiyane, A.,(2013), Effect of Jute Fibre Loading On Tensile And Dynamic Mechanical Properties of Oil Palm Epoxy Composites,Composites Part B-Engineering,45,(1),619-624

60. Ooi, Zhong Xian; Ismail, H.; Abu Bakar, A.,(2013), Synergistic Effect of Oil Palm Ash Filled Natural Rubber Compound At Low Filler Loading,Polymer Testing,32,(1),38-44

61. Husseinsyah, Salmah; Azmin, Azieyanti Nurain; Ismail, Hanafi.,(2013), Effect of Maleic Anhydride-Grafted-polyethylene (MAPE) and Silane on Properties of Recycled Polyethylene/Chitosan Biocomposites,Polymer-Plastics Technology And Engineering,52,(2),168-174

62. Chang, Boon-Peng; Akil, Hazizan Md; Nasir, Ramdziah Bt Md.,(2013), Comparative Study of Micro- And Nano-ZnO Reinforced UHMWPE Composites Under Dry Sliding Wear,Wear,297,(1-2),1120-1127

63. Ismail, H.; Mathialagan, M.,(2013), compatibilization of Bentonite Filled Ethylene-Propylene-Diene Monomer Composites: Effect of Maleic Anhydride Grafted EPDM,Journal Of Applied Polymer Science,127,(2),1164-1171

64. Raju, Guna Sunderi; Haris, Mas Rosemal Hakim Mas; Azura, A. R.; Baharin, A.; Kartini, N (2013), Effect of Chitosan Loading on Mechanical Properties, Water Uptake and Toluene Absorbency of High and Low Molecular Weight ENR50,Journal Of Rubber Research,16,(3),179-194

65. Dungani, Rudi; Islam, Md Nazrul; Khalil, H. P. S. Abdul; Hartati, Sri.;Abdullah,C.K.; Dewi, M.; Hadiyane, A.,(2013), Termite Resistance Study of Oil Palm Trunk Lumber (OPTL) Impregnated with Oil Palm Shell Meal and Phenol-Formaldehyde Resin,Bioresources,8,(4),4937-4950

66. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar.,(2013), The Effect of Hydrochloric Acid Treatment on Properties of Oil Palm Ash-filled Natural Rubber Composites,Bioresources,8,(4),5133-5144

67. Balakrishna, Nurshamila Shaari; Ismail, Hanafi; Othman, Nadras.,(2013), Processing, Mechanical, and Thermal Properties of Polypropylene/Rattan Powder/Talc Hybrid Composites,Bioresources,8,(4),6409-6423

68. Zaharri, N. D.; Othman, N.; Ishak, Z. A. Mohd.,(2013), Effect of Zeolite Modification via Cationic Exchange Method on Mechanical, Thermal, and Morphological Properties of Ethylene Vinyl Acetate/Zeolite Composites,Advances In Materials Science And Engineering,Article Number:394656

69. Kusmono; Ishak, Zainal Arifin Mohd.,(2013), Effect of Clay Addition on Mechanical Properties of Unsaturated Polyester/Glass Fiber Composites,International Journal Of Polymer Science,Article Number:797109

70. Amir, Freeda A.; Othman, A. R.; Akil, H. Md.,(2013), Damage Characterization of Polypropylene Honeycomb Sandwich Panels Subjected to Low-Velocity Impact,Advances In Materials Science And Engineering,Article Number:129864

71. Ramlee, R.; Mariatti, M.; Ishak, Z. A. Mohd;Mohamed, A. R,(2013), Properties of Glass Fiber-Carbon Nanotube (CNT)/Epoxy Composites,Journal Of Polymer Materials,30,(1)103-116

72. Ramasamy, Shamala; Ismail, Hanafi; Munusamy, Yamuna.,(2013), Effect of Rice Husk Powder on Compression Behavior and Thermal Stability of Natural Rubber Latex Foam,Bioresources,8,(3),4258-4269

73. Salim, Nurjannah; Hashim, Rokiah; Sulaiman, Othman; Nordin, N.A.;Ibrahim, M.; Akil, H.M,; Sato, M.; Sugimoto, T.; Hiziroglu, S.,(2013), Effect of Steaming on Some Properties of Compressed Oil Palm Trunk Lumber,Bioresources,8,(2)2310-2324

74. Saad, Anis Safinas Md; Abu Bakar, Azhar; Ismail, Hanafi.,(2013), Properties of Kenaf Bast Powder-Filled High Density Polyethylene/Ethylene Propylene Diene Monomer Composites,Bioresources,8,(2),2386-2397

75. Dungani, Rudi; Jawaid, M.; Khalil, H. P. S. Abdul;Jasni,;Aprilia, S.;Hakeem, K. R.;Hartati, S.;Islam, M. N.,(2013), A Review on Quality Enhancement of Oil Palm Trunk Waste by Resin Impregnation: Future Materials,Bioresources,8,(2),3136-3156

76. Safwan, M. Muhammad; Lin, Ong Hui; Akil, Hazizan Md.,(2013), Preparation and Characterization of Palm Kernel Shell/Polypropylene Biocomposites and their Hybrid Composites with Nanosilica,Bioresources,8,(2)1539-1550

77. Ismail, H.; Ishak, S.; Hamid, Z. A. A.,(2013), Comparison Effect of Mica and Talc as Filler in EPDM Composites on Curing, Tensile and Thermal Properties,Progress In Rubber Plastics And Recycling Technology,29,(2),109-122

78. Pang, Ai Ling; Ismail, Hanafi.,(2013), Tensile Properties, Water Uptake, and Thermal Properties of Polypropylene/Waste Pulverized Tire/Kenaf (PP/WPT/KNF) Composites,Bioresources,8,(1),806-817

79. Yusriah, L.; Mariatti, M.,(2013), Effect of hybrid phenolic hollow microsphere and silica-filled vinyl ester composites,Journal Of Composite Materials,47,(2),169-182

80. Suriati, G.; Mariatti, M.; Azizan, A.,(2013),Silver-Filled Epoxy Composites: Effect of Hybrid and Silane Treatment on Thermal Properties,Polymer Bulletin,70,(1),311-323

81. Pasbakhsh, P.; Ismail, H.; Nor, A. F. Mohd;Abu Bakar,A.,(2013), Electron Beam Irradiation of Sulphur Vulcanised Ethylene Propylene Diene Monomer (EPDM) Nanocomposites Reinforced by Halloysite Nanotubes,Plastics Rubber And Composites,41,(10),430-440


82. Razaina Mat Taib, Husna Madihah Hasan,(2013), Tensile Properties And Morphology Of Pla/Kenaf Fiber Composites Toughened With Ethylene Acrylic Copolymer, Malaysian Journal of Microscopy,9, 173-178


83. Razaina Mat Taib, Nurul Mujahidah Ahmad Khairuddin, and Zainal Arifin Mohd Ishak, The Influence of AlkaliTreatment and Compatibilizer Addition on the Tensile Properties and Water Absorption Behavior of Polypropylene/Kenaf Fiber Composites, Advanced Materials Research, 626, 449-453


84. Ahmad Thirmizir, M. Z., Mohd Ishak, Z. A., Mat Taib, R., Rahim, S.,(2013), Effect of Maleated Compatibiliser (PBS-g-MA) Addition On The Flexural Properties And Water Absorption Of Poly(Butylene Succinate)/Kenaf Bast Fiber Composites, Sains Malaysiana 42,435-441


85. Isa, M. T., Ahmed, A. S., Aderemi, B. O., Taib, R. M., Mohammed-Dabo, I. A., (2013), Effect of Fiber Type And Combinations On The Mechanical, Physical And Thermal Stability Properties Of Polyester Hybrid Composites, Composites Part B: Engineering, 52, 217-223


86. J. M. Lee, Z. A. Mohd Ishak, R. Mat Taib, T. T. Law, M. Z. Ahmad Thirmizir, (2013),Mechanical, thermal and
water absorption properties of kenaf fiber-based polypropylene and poly(butylene succinate) composites, Journal of Polymers and the Environment, 21,293-302


87. Zahari, N.D., Othman, N., Mohd Ishak, Z. A., (2013), Surface Effects And Contact Mechanics Xi; Computational Methods And Experimental, effect of silane modification on mechanical and thermal properties of ethylene vinyl acetate/zeolite composites

1. Tham, W.L.; Poh, B.T.,Ishak, Z.A.M.; Chow, W.S.,(2014),Thermal Behaviors and Mechanical Properties of Halloysite Nanotube-Reinforced Poly(Lactic Acid) Nanocomposites, Journal Of Thermal Analysis And Calorimetry, 118,(3),1639-1647



2. Pang, A.L.; Ismail, H.;(2014),Effects of Kenaf Loading and 3-Aminopropyltriethoxysilane Coupling Agent on the Properties of Polypropylene/Waste Tire Dust/Kenaf Composites, Journal Of Thermoplastic Composite Materials,27,(12)1607-1619


3. Ragunathan, S .; Ismail, H.; Hussin, K.;(2014),Comparison of Processing and Mechanical Properties Of Polypropylene/Recycled Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites Modified with Silane and Acetic Anhydride Compound, Journal Of Thermoplastic Composite Materials, 27,(12),1651-1666


4. Boon, M.S.; Mariatti, M.;(2014), Silane Treatment of Magnetite Filler and Its Effect on the Properties of Magnetite-Filled Epoxy Thin-Film Composites, Polymer Bulletin, 71(12),3333-3346


5. Cao, X.V.; Ismail, H.; Rashid, A.A.; Takeichi, T.; Thao, V.H.;(2014), Effect of Filler Surface Treatment on the Properties of Recycled High-Density Polyethylene/(Natural Rubber)/(Kenaf Powder) Biocomposites, Journal Of Vinyl & Additive Technology,20,(4),218-224


6. Rahim, N.A.A.; Ariff, ZM.; Ariffin, A.; Zakaria, Z.; Osman, H.; Metselaar, H.C.:(2014), Viscosity Analysis of Polypropylene-Kaolin CompositesMeasured Using Single-Screw Extruder, Journal Of Vinyl & Additive Technology, 20,(4),275-283


7. Saidina, D.S.; Mariatti, M.; Julie, M.J.; (2014),Properties of Calcium Copper Titanate and Barium Titanate Filled Epoxy Composites for Electronic Applications: Effect of Filler Loading and Hybrid Fillers, Journal Of Materials Science-Materials In Electronics,25,(11),4923-4932


8. Zamri, M.H.; Akil, H.M.; Safiee, S.; Ishak, Z.A.M,; Bakar, A.A,; (2014),Predicting the Coefficient of Thermal Expansion of Pultruded Composites with a Natural-Fiber Reinforcement, Mechanics Of Composite Materials, 50,(5),603-612


9. Hamzah, M.S.; Hidayah, I.N.; Mariatti, M.; Kamarol, M.;(2014), Dielectric and Thermal Properties of Flame Retardant Fillers In Polypropylene/Ethylene Propylene Diene Monomer Composites, Journal Of Reinforced Plastics And Composites,33,(21),1931-1940


10. Zakaria, M.R.; Akil, HM.; Kudus, M.H.A.; Saleh, S.S.M.;(2014), Enhancement of Tensile and Thermal Properties of Epoxy Nanocomposites Through Chemical Hybridization of Carbon Nanotubes and Alumina, Composites Part A-Applied Science And Manufacturing,66,109-116


11. Fatah, I.Y.A.; Khalil, HPSA.; Hossain, M.S.; Aziz, A.A.; Davoudpour, Y.;Dungani, R.; Bhat, A.;(2014),Exploration of a Chemo-Mechanical Technique for the Isolation of Nanofibrillated Cellulosic Fiber from Oil Palm Empty Fruit Bunch as a Reinforcing Agent in Composites Materials,Polymers,6,(10),2611-2624


12. Ooi, Z.X.; Ismail, H.; Abu Bakar, A.;(2014), Thermal Properties and Aging Characteristics of chemically Modified Oil Palm Ash-Filled Natural Rubbercomposites, Iranian Polymer Journal,23,(9),723-730


13. Aprilia, N.A.S.; Khalil, H.P.S.A.; Bhat, A.H.; Dungani, R.; Hossain, M.S.; (2014),Exploring Material Properties of Vinyl Ester Biocomposites Filled Carbonized Jatropha Seed Shell, Bioresources, 9,(3),4888-4898


14. Husseinsyah, S.; Yeng, C.M.; Kassim, A.R.; Zakaria, M.M.; Ismail, H.; (2014),Kapok Husk-Reinforced Soy Protein Isolate Biofilms: Tensile Properties and Enzymatic Hydrolysis,Bioresources, 9,(3)5636-5651


15. Chang, Boon Peng; Akil, Hazizan Md; Affendy, Muhammad Ghaddafy, Khan, Abbas Nasir, R.B.M.,(2014),Comparative Study of Wear Performance of Particulate and Fiber-Reinforced Nano-Zno/Ultra-High Molecular Weight Polyethylene Hybrid Composites Using Response Surface Methodology,Materials&Design, 63,805-819


16. Pang, Ai Ling; Ismail, Hanafi(2014), Influence of Kenaf Form and Loading On The Properties of Kenaf-Filled Polypropylene/Waste Tire Dust Composites: a Comparison Study, Journal Of Applied Polymer Science,131(19) Article Number:40877


17. Ismail, Hanafi; Ahmad, Hazwani Syaza,(2014), Effect of Halloysite Nanotubes on Curing Behavior, Mechanical, and Microstructural Properties of Acrylonitrile-Butadiene Rubber Nanocomposites, Journal Of Elastomers And Plastics, 46,(6),483-498


18. Sheril, R. V.;Mariatti, M.; Samayamutthirian, P.(2014) Single and Hybrid Mineral Fillers (Talc/Silica and Talc/Calcium Carbonate)-Filled Polypropylene Composites: Effects of Filler Loading and Ratios, Journal Of Vinyl & Additive ,20,(3),160-167


19. Pang, A. L.;Ismail, H.(2014), Studies on the Properties Of Polypropylene/(Waste Tire Dust)/Kenaf (PP/WTD/KNF) Composites With Addition of Phthalic Anhydride (PA) As A Function Of KNF Loading, Journal Of Vinyl & Additive Technology,20,(3),193-200


20. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar(2014), Study on The Ageing Characteristics of Oil Palm Ash Reinforced Natural Rubber Composites by Introducing A Liquid Epoxidized Natural Rubber Coating Technique, Polymer Testing,37,156-162


21. Nabil, H.; Ismail, H.;(2014), Dynamic Mechanical Behavior of Natural Rubber/Waste Ethylene-Propylene-Diene Rubber Blends, Kgk-Kautschuk Gummi Kunststoffe ,67,(7-8),33-39


22. Low, L. F.; Abu Bakar, A.(2014), Mechanical, Thermal and Water Absorption Behavior of Hollow Epoxy Particle-Filled Polyester Composites,Journal Of Composite Materials,48,(14),1725-1733


23. Yusriah, L.; Sapuan, S. M.; Zainudin, E. S.; Mariatti, M.,(2014), Characterization of Physical, Mechanical, Thermal And Morphological Properties of Agro-Waste Betel Nut (Areca Catechu) Husk Fibre, Journal Of Cleaner Production,72,174-180


24. Ismail, H.; Zaaba, N. F.,(2014), Effects of Poly(Vinyl Alcohol) on The Performance of Sago Starch Plastic Films, Journal Of Vinyl & Additive Technology,20,(2),72-79


25. Ismail, H.; Ishak, S.; Hamid, Z. A. A.,(2014), Effect Of Silane Coupling Agent on the Curing, Tensile, Thermal, and Swelling Properties of Ethylene-Propylene-Diene Monomer Rubber (EPDM)/Mica Composites, Journal Of Vinyl & Additive Technology,20,(2),116-121


26. Supri, A. G.; Tan, S. J.;Ismail, H.; Teh, P.L.,(2014), Properties of (Low-Density Polyethylene)/(Natural Rubber)/(Water Hyacinth Fiber) Composites: The Effect of Polyaniline, Journal Of Vinyl & Additive Technology,20,(2),122-130


27. Mohammadpour, Ehsan; Awang, Mokhtar; Kakooei, Saeid; Akil, H.M.,(2014), Modeling the Tensile Stress-Strain Response of Carbon Nanotube/Polypropylene Nanocomposites Using Nonlinear Representative Volume Element, Materials & Design,58,36-42


28. Amani, H.; Ahmad, Z.; Hameed, B. H.(2014), Synthesis of Fatty Acid Methyl Esters Via The Methanolysis Of Palm Oil Over Ca3.5xZr0.5yAlxO3 Mixed Oxide Catalyst, Renewable Energy,66,680-685


29. Pang, Ming Meng; Pun, Meng Yan; Ishak, Zainal Arifin Mohd(2014), Thermal, Mechanical, and Morphological Characterization of Biobased Thermoplastic Starch From Agricultural Waste/Polypropylene Blends, Polymer Engineering And Science,54,(6)1357-1365


30. Poh, C. L.; Mariatti, M.; Fauzi, M. N. Ahmad; Ng, C. H.; Chee, C. K.; Chuah, T. P,;(2014), Tensile, Dielectric, And Thermal Properties of Epoxy Composites Filled With Silica, Mica, And Calcium Carbonate, Journal Of Materials Science-Materials In Electronics,25,(5),2111-2119


31. Irani, Maryam; Ismail, Hanafi; Ahmad, Zulkifli,(2014), Hydrogel Composites Based on Linear Low-Density Polyethylene-g-Poly (Acrylic Acid)/Kaolin or Halloysite Nanotubes, Journal Of Applied Polymer Science,131,(8),Article Number:40101


32. Akil, Hazizan Md; Santulli, Carlo; Sarasini, Fabrizio; Tirillo, Jacopo; Valente;Teodoro.,(2014), Environmental Effects on The Mechanical Behaviour of Pultruded Jute/Glass Fibre-Reinforced Polyester Hybrid Composites,
Composites Science And Technology,94,62-70


33. Nabil, H.; Ismail, H.; Ratnam, C. T.,(2014), Simultaneous Enhancement of Mechanical and Dynamic Mechanical Properties of Natural Rubber/Recycled Ethylene-Propylene-Diene Rubber Blends by Electron Beam Irradiation, International Journal Of Polymer Analysis And Characterization,19,(3),272-285


34. Islam, Md Nazrul; Ando, Keisuke; Yamauchi, Hidefumi; Kamikawa, D; Harada, T ; Khalil, H. P. S. Abdul; Khalil, H. P. S. Abdul; Hattori, N ,(2014), Impregnation Of Laser Incised Wood of Douglas Fir and Japanese Cedar by Dipping (Passive Impregnation) In Solutions Of Copper Azole (CuAz- B) and a Fire Retardant (PPC),Holzforschung,68,(3),353-360


35. Chang, Boon Peng; Akil, Hazizan Md; Nasir, Ramdziah Bt Md; Bandara, I. M. C. C. D; Rajapakse,S;(2014), The Effect Of Zno Nanoparticles On The Mechanical, Tribological And Antibacterial Properties of Ultra-High Molecular Weight Polyethylene,Journal Of Reinforced Plastics And Composites,33,(7),674-686


36. Nabil, H.; Ismail, H.;(2014), Enhancing The Thermal Stability of Natural Rubber/Recycled Ethylene-Propylene-Diene Rubber Blends By Means of Introducing Pre-Vulcanised Ethylene-Propylene-Diene Rubber And Electron Beam Irradiation,Materials & Design,56,1057-106


37. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar,(2014) Chemically Modified Oil Palm Ash- Filled Natural Rubber Composites and its Properties,Polymer Composites,35(4),691-697


38. Omar, Mohd Firdaus; Akil, Hazizan Md; Ahmad, Zainal Arifin; Mahmud, Shahrom,(2014), Static and Dynamic Compressive Properties of Polypropylene/Zinc Oxide Nanocomposites,Polymer Engineering And Science,54,(4),949-960


39. Boon, M. S.; Mariatti, M.(2014), Optimization of Magnetic and Dielectric Properties Of Surface-Treated Magnetite-Filled Epoxy Composites By Factorial Design,Journal Of Magnetism And Magnetic Materials,355,319-324


40. Balakrishna, Nurshamila Shaari; Ismail, H.; Othman, N.(2014), Polypropylene/Rattan Powder/Kaolin Hybrid Composites: Processing, Mechanical And Thermal Properties, Polymer-Plastics Technology And Engineering,53(5)451-458


41. Tham, W. L.; Ishak, Z. A. Mohd; Chow, W. S.(2014), Water Absorption and Hygrothermal Aging Behaviors of SEBS-g-MAH Toughened Poly(lactic acid)/Halloysite Nanocomposites,Polymer-Plastics Technology And Engineering,53,(5),472-480


42. Tham, W. L.; Ishak, Z. A. Mohd; Chow, W. S.(2014), Mechanical And Thermal Properties Enhancement of Poly(Lactic Acid)/Halloysite Nanocomposites by Maleic-Anhydride Functionalized Rubber,Journal Of Macromolecular Science Part B-Physics,53,(3),371-382


43. Zulfli, N. H. Mohd; Abu Bakar, A.; Chow, W. S.(2014), Mechanical And Thermal Properties Improvement of Nano Calcium Carbonate-Filled Epoxy/Glass Fibercomposite Laminates,High Performance Polymers,26,(2),223-229


44. Ghaleb, Z. A.; Mariatti, M.; Ariff, Z. M.(2014), Properties of Graphene Nanopowder And Multi-Walled Carbon Nanotube-Filled Epoxy Thin-Film Nanocomposites For Electronic Applications: The Effect of Sonication Time And Filler Loading,Composites Part A-Applied Science And Manufacturing,58,77-8


45. Kong, K. T. S.; Mariatti, M.; Rashid, A. A.; Busfield, J. J. C.,(2014), Enhanced Conductivity Behavior of Polydimethylsiloxane (Pdms) Hybrid Composites Containing Exfoliated Graphite Nanoplatelets and Carbon Nanotubes,Composites Part B-Engineering,58,457-462.


46. Hassani, A. J.; Ishak, Z. A. Mohd; Mohamed, A. R.(2014), Preparation and Characterization of Polyamide 6 Nanocomposites Using Mwcnts Based on Bimetallic Co-Mo/Mgo Catalyst,Express Polymer Letters,8,(3),177-186


47. Nabil, H.; Ismail, H.;(2014),Blending of Natural Rubber/Recycled Ethylene-Propylene-diene Rubber: Promoting the Interfacial Adhesion Between Phases by Natural Rubber Latex,International, Journal Of Polymer Analysis And Characterization,19,(2),159-174


48. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar,(2014),Curing Characteristics, Mechanical, Morphological, and Swelling Assessment of Liquid Epoxidized Natural Rubber Coated Oil Palm Ash Reinforced Natural Rubber Composites,Polymer Testing,33,145-151


49. Ismail, Hanafi; Zaaba, Nor Fasihah,(2014), The Mechanical Properties, Water Resistance And Degradation Behaviour of Silica-Filled Sago Starch/Pva Plastic Films,Journal Of Elastomers And Plastics,46,(1),96-U19


50. Jawaid, M.; Alothman, Othman Y.; Paridah, M. T.; Khalil, H. P. S. Abdul,(2014), Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites,International Journal Of Polymer Analysis And Characterization,19,(1),62-69


51. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar,(2014), Characterization and Properties of Pretreatment Effect on Oil Palm Ash Filled Natural Rubber Vulcanizates,Polymer-Plastics Technology And Engineering,53,(2),123-129


52. Taib, R. Mat; Hassan, H. M.; Ishak, Z. A. Mohd,(2014), Mechanical and Morphological Properties of Polylactic Acid/Kenaf Bast Fiber Composites Toughened with an Impact Modifier,Polymer-Plastics Technology And Engineering,53,(2 ),199-206


53. Khalil, H. P. S. Abdul; Davoudpour, Y.; Islam, Md. Nazrul; Mustapha, A ;Sudesh, K.;Dungani, R.;Jawaid, M.,(2014), Production and Modification of Nanofibrillated Cellulose Using Various Mechanical Processes: A Review,Carbohydrate Polymers,99,649-665


54. Jawaid, M.; Othman, Alothman; Saba, N.; Shekeil, Y. A.;Paridah, M. T.; Khalil, H. P. S. Abdul,(2014) Effect of Chemical Modifications of Fibers on Tensile Properties of Epoxy Hybrid Composites,International Journal Of Polymer Analysis And Characterization,19,(5),391-403


55. Chow, W. S.; Leu, Y. Y.; Ishak, Z. A. Mohd,(2014), Water Absorption of Poly(Lactic Acid) Nanocomposites: Effects of Nanofillers And Maleated Rubbers,Polymer-Plastics Technology And Engineering,53,(8),858-863


56. Sasthiryar, Sivabalan; Khalil, H. P. S. Abdul; Ahmad, Z. A.;Islam,M.N.;Dungani, R.; Fizree, H.M,(2014), Carbon Nanofiller-enhanced Ceramic Composites: Thermal and Electrical Studies,Bioresources,9,(2),3143-3151


57. Suki, F. M. Mat; Ismail, H.; Hamid, Z. A. Abdul,(2014), Preparation and Properties of Polyvinyl Alcohol/Banana Frond Flour Biodegradable Film,Progress In Rubber Plastics And Recycling Technology,30,(2),103-114


58. Nabil, H.; Ismail, H.(2014), Fatigue Life, Thermal Analysis and Morphology of Recycled Poly(ethylene terephthalate)/Commercial Fillers Hybrid Filled Natural Rubber Composites,Progress In Rubber Plastics And Recycling Technology,30(2)115-128


59. Alwani, M. Siti; Khalil, H. P. S. Abdul; Sulaiman, O.; Islam, M.N.; Dungani, R.,(2014), An Approach to Using Agricultural Waste Fibres in Biocomposites Application: Thermogravimetric Analysis and Activation Energy Study,Bioresources,9,(1)218-230


60. Dungani, Rudi; Islam, Md Nazrul; Khalil, H. P. S. Abdul; Rumidatul,A.,(2014), Modification of The Inner Part Of The Oil Palm Trunk (OPT) with Oil Palm Shell (OPS) Nanoparticles and Phenol Formaldehyde (PF) Resin: Physical, Mechanical, and Thermal Properties,Bioresources,9,(1),455-471


61. Sasthiryar, Sivabalan; Khalil, H. P. S. Abdul; Bhat, A. H.; Ahmad, Z.A.; Islam, M.N.; Zaidon, A.;Dungani, R,(2014), Nanobioceramic Composites: A Study Of Mechanical, Morphological, and Thermal Properties,Bioresources,9,(1),861-871


62. Hamma, A.; Kaci, M.; Ishak, Z. A. Mohd; Pegoretti, A,(2014), Starch-Grafted-Polypropylene/Kenaf Fibres Composites. Part 1: Mechanical Performances and Viscoelastic Behaviour,Composites Part A-Applied Science And Manufacturing,56,328-335


63. Chow, W. S.; Leu, Y. Y.; Ishak, Z. A. Mohd(2014), Poly(Lactic Acid) Nanocomposites with Improved Impact and Thermal Properties,Journal Of Composite Materials,48,(2),155-163


64. Nabil, H.; Ismail, H.; Azura, A. R.,(2014), Optimisation of Accelerators and Vulcanising Systems on Thermal Stability Of Natural Rubber/Recycled Ethylene-Propylene-Diene-Monomer Blends,Materials & Design,53,651-661


65. Rezaei, S. M.; Ishak, Z. A. Mohd,(2014), Grafting of Collagen Onto Interpenetrating Polymer Networks of Poly(2-Hydroxyethyl Methacrylate) And Poly(Dimethyl Siloxane) Polymer Films For Biomedical Applications,Express Polymer Letters,8,(1),39-49


66. Razaina Mat Taib, Dody Ariawan, Zainal Arifin Mohd Ishak,(2014), Alkali Treatment of Kenaf Fiber Mat and its Influence on the Performance of Unsaturated Polyester/Kenaf Fiber Mat Composites, Advanced Materials Research, 1024,171-174


67. Dody Ariawan, Zainal Arifin Mohd Ishak, Razaina Mat Taib, M.Z. Ahmad Thirmizi, Y.J. Phua, (2014), Effect of Needle Punching Direction on Nonwoven Fiber Mat to the Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Vacuum Assisted Resin Transfer Molding, Advanced Materials Research, 1024, , 267-270


68. Ismail, Hanafi; Zaaba, Nor Fasihah,(2014), The Mechanical Properties, Water Resistance And Degradation Behaviour of Silica-Filled Sago Starch/Pva Plastic Films,Journal Of Elastomers And Plastics,46,(1),96-U19


69. Ooi, Zhong Xian; Ismail, Hanafi; Abu Bakar, Azhar,(2014), Characterization and Properties of Pretreatment Effect on Oil Palm Ash Filled Natural Rubber Vulcanizates,Polymer-Plastics Technology And Engineering,53,(2),123-129


70. Taib, R. Mat; Hassan, H. M.; Ishak, Z. A. Mohd,(2014), Mechanical and Morphological Properties of Polylactic Acid/Kenaf Bast Fiber Composites Toughened with an Impact Modifier,Polymer-Plastics Technology And Engineering,53,(2 ),199-206


71. Khalil, H. P. S. Abdul; Davoudpour, Y.; Islam, Md. Nazrul; Mustapha, A ; Sudesh, K.; Dungani, R.; Jawaid, M.,(2014), Production and Modification of Nanofibrillated Cellulose Using Various Mechanical Processes: A Review,Carbohydrate Polymers,99,649-665


72. Anjang A., Chevali V.S., Kandare E., Mouritz A.P., Feih, S., (2014), Tension Modelling and Testing of Sandwichh Composites in Fire, Composites Structures,133,437-445


73. Othman, N., Kahar, A.W., Ismail, H., (2014) Thermoplastics Elastomer From High Density Polyethylene/Natural Rubber: Effects Of Different Dynamic Vulcanisation, Royal Society of Chemistry,

1. Chow, W.S.; Ng, K.; Ishak, Z.A.M.; Hashim, H.; Noor, S.N.F.M.;(2015),Human Gingival Fibroblasts Cell Viability of Poly(Lactic Acid) Powder Reinforced PMMA/Hydroxyapatite Biocomposites, International Journal Of Polymeric Materials And Polymeric Biomaterials,64(4),192-197


2. Alwani, M.S.; Khalil, H.P.S.A.; Islam, M.N.; Sulaiman, O.; Zaidon, A.; Dungani, R.;(2015),Microstructural Study, Tensile Properties, and Scanning Electron Microscopy Fractography Failure Analysis of Various Agricultural Residue Fibers, Journal Of Natural Fibers, 12,(2),154-168


3. Chow, W.S.; Teoh, E.L.;(2015),Flexible and Flame Resistant Poly(lactic acid)/Organomontmorillonite Nanocomposites, Journal Of Applied Polymer Science,132,(2),Article Number : 41253


4. Law, T.T., Phua, Y.J.,Senawi, R.,Hassan, A., Mohd Ishak Z.A.,(2015), Experimental Analysis And Theoretical Modeling of the Mechanical Behavior Of Short Glass Fiber And Short Carbon Fiber Reinforced Polycarbonate Hybrid Composites,Polymer Composites, Article in press


5. Chow, W.S.,Ng, K.,Mohd Ishak,Z.A.,Hashim,H.,Mohd Noor,S.N.F.,(2015),Human Gingival Fibroblasts Cell Viability Of Poly(Lactic Acid) Powder Reinforced PMMA/Hydroxyapatite Biocomposites, International Journal of Polymeric Materials and Polymeric Biomaterials,64,(4),192-197


6. Chow, W.S. Mohd Ishak, Z.A.,(2015),Polyamide Blend-Based Nanocomposites: A Review,Express Polymer Letters,9,(3),211-232


7. Maryam Irani, Hanafi Ismail, Zulkifli Ahmad,Maohong Fan,(2015), Synthesis of Linear Low-Density Polyethylene-G-Poly (Acrylic Acid)-Co-Starch/Organo-Montmorillonite Hydrogel Composite As An Adsorbent For Removal of Pb(Ιι) From Aqueous Solutions,Journal of Environmental Sciences,27, 9-20


8. Yusriah, L., Sapuan, S.M., Zainudin, E.S.,Mariatti, M., Jawaid, M,(2015),Thermo-Physical.Thermal Degradation,and Flexural Properties of Betel Nut Husk Fiber Reinforced Vinyl Ester Composites,Polymer Composites, Article in press


9. Anjang, V.S. Chevali, B.Y. Lattimer, S.W. Case, S. Feih, A.P. Mouritz,(2015) Post-Fire Mechanical Properties of Sandwich Composite Structures, Composite Structures,132,1019-1028


10. Law, T.T., Phua, Y.J.,Senawi, R.,Hassan, A., Mohd Ishak Z.A.,(2015), Experimental Analysis And Theoretical Modeling of the Mechanical Behavior Of Short Glass Fiber And Short Carbon Fiber Reinforced Polycarbonate Hybrid Composites,Polymer Composites, Article in pres


11. Chang, B.P., Akil, H.M., Nasir, R.B., Khan, A., (2015) Optimization on Wear Performance of UHMWPE Compositesusing Response Surface Methodology, Tribology International,88,252-262


12. Zamri, M.H., Akil, H.M., Ishak, Z.A.M., Abu Bakar, A., (2015) Effect of Different Fiber Loadings and Sizes on Pultruded Kenaf Fiber Reinforced Unsaturated Polyester Composites, Polymer Composites,36,(7),1224-1229


13. Omar, M.F., Akil, H.M., Rasyid, M.F.A., Sharif, J.M.,(2015) Thermal Properties of Polypropylene/Muscovite Layered Silicate composites: Effects of Organic Modifications and Compatibilisers, Journal of Composite Materials,49,(10),1195-1209


14. M.F Omar, A Wahab, N Suhaili, H.M Akil, Z.A Ahmad, N.Z Noriman, (2015), Measurement on Strain Rate Sensitivity Properties Of Rice Husk (Rh)/Linear Low Density Polyethylene (Lldpe) Composites Under Various Loading Rates, Applied Mechanics and Materials,754, 77-82


15. Phua, Y.J., Lau, N.S., Sudesh, K., Chow, W.S., Ishak, Z.A.M., (2015) A Study on the Effects of Organoclay Content and Compatibilizer Addition on the Properties of Biodegradable Poly(Butylene Succinate) Nanocomposites Under Natural Weathering, Journal of Composite Materials,49,(8),891-902


16. Nabil, H., Ismail, H., (2015), Preparation and Properties Of Recycled Poly(Ethylene Terephthalate) Powder/Halloysite Nanotubes Hybrid-Filled Natural Rubber Composites, Journal Of Thermoplastic Composite Materials,28,(3),415-430


17. Aprilia, N.A.S., Hossain, M.S., Abdullah, C.K., Khalil, H.P.S.A., Rosamah, E., Dungani, R., Devoudpour, Y., Zaidul, I.S.M., (2015), Environmental Durability of Vinyl Ester Composites Filled with Carbonized Jatropha Seed Shell, Bioresources,10,(2),2350-2359


18. Ratnam, C.T., Ramlee, N.A., Appadu, S., Manshor, S.M., Ismail, H.,(2015) Preparation and Electron Beam Irradiation of PVC/ENR/CNTs Nanocomposites, Polymer-Plastics Technology And Engineering,54,(2),184-191


19. Phan, C.H., Mariati, J., Koh, Y.H., (2015), Mild Functionalization of Carbon Nanotubes Filled Epoxy Composites: Effect on Electromagnetic Interferences Shielding Effectiveness,Journal Of Applied Polymer Science,132(38)


20. Chow, W.S., Chang, L.N., Jaafar, M., (2015), Flame Retardant Epoxy Hybrid Composite Laminates Prepared by Vacuum-Assisted Resin Infusion Technique,Journal Of Composite Materials,49(12),1471-1481


21. Firdaus, S.M., Mariati M.,(2015), Nano-Sizes Boron Nitride Epoxy Composites for Underfill Application :Effect of Diluent and Filler Loading, Journal Of Materials Science-Materials In Electronics,26,(2),774-783


22. Ismail, H., Khoon, T.B., Hayeemasae, N., Husseinsyah, S., (2015,) Effect of Oil Plam Ash on the Properties of Polypropylene/Recycled Natural Rubber Glove/Oil Plam Ash Composites,Bioresources,10,(1),1495-1505


23. Hamma, A., Kaci, M., Ishak, Z.A.M., Ceccato, R., Pegoretti, A.,(2015), Starch- Grafted-Polypropylene/Kenaf Fiber Composites. Part 2:Thermal Stability and Dynamic-Mechanical Response,Journal Of Reinforced Plastics And Composites,34,(24),2045-2058


24. Zakaria, M.R., Akil, H.M., Kudus, M.H.A., Kadarman, A.H., (2015) Improving Flexural And Dielectric Properties Of Mwcnt/Epoxy Nanocomposites By Introducing Advanced Hybrid Filler System,Composite Structures,132,50-64


25. Saidina, D.S., Norshamira, A., Mariatti, M., (2015), Dielectric and Thermal Properties of CCTO/Epoxy Composites For Embedded Capacitor Applications: Mixing And Fabrication Methods, Journal Of Materials Science-Materials In Electronics, 26,(10), 8118-8129


26. Davodpour,Y., Hossain, S., Khalil, H.P.S.A., Haafiz, M.K.M.,Ishak, Z.A.M., Hassan, A., Sarker, Z.A.,(2015), Optimization of High Pressure Homogenization Parameters for the Isolation of Cellulosic Nanofiber Using Response Surface Methodologu,Industrial Crops And Products,74,381-387


27. Tai, C.K., Ahmad, R., Akil, H.M., Ratnam, M.M., (2015), Effect Of Alkali Treatment And Molding Temperature On Flexural And Impact Properties Of Coir-Fibre-Epoxy Composite, Advanced Composites Letters, 24,(4),73-80


28. Zulkarnain, M., Husaini, M., Mariatti, M., Azid, I.A.,(2015), Particle Arrangement Design for Predicting the Percolation Threshold of Silver/Epoxy Composite for Electrically Conductive Adhesive Application, Journal Of Electronic Materials,44,(11),4525-4532


29. Rahim, T.N.A.T., Abdullah, A.M., Akil, H.M., ; Mohamad, D., Rajion, Z.A., (2015), Preparation and Characterization of a Newly Developed Polyamide Composite Utilising an Affordable 3D Printer, Journal Of Reinforced Plastics And Composites,34,(19), 1628-1638


30. Hidayah, .I.N., Mariatti, M., Ismail, H., Kamarol, M., (2015), Evaluation of PP/EPDM Nanocomposites Filled with SiO2, TiO2 and ZnO Nanofillers as Thermoplastic Elastomeric Insulators, Plastics Rubber And Composites,44(7), 259-264


31. Nuraya, A.S.S., Baharin, A., Azura, A.R., (2015), Influence of Banana Stem Powder on Knotty Tear Behaviour of Prevulcanised Natural Rubber Latex Composite Films, Plastics Rubber And Composites,44,(7), 265-272


32. Jawaid, M., Alothman, O.Y., Saba, N., Tahir, P.M., Khalil, H.P.S.A., (2015), Effect of Fibers Treatment on Dynamic Mechanical and Thermal Properties Of Epoxy Hybrid Composites, Polymer Composites,36,(9), 1669-1674


33. Hayeemasae, N., Ismail, H., (2015), Thermo-Mechanical Performance of Natural Rubber/Recycled Ethylene-Propylene-Diene Rubber Blends in the Presence of ZnO Nanoparticles, International Journal Of Polymer Analysis And Characterization,20,(6), 514-528


34. Fazita, M.R.N., Jayaraman, K., Bhattacharyya, D., Hossain, M.S., Haafiz, M.K.M., Khalil, HPSA., (2015), Disposal Options of Bamboo Fabric-Reinforced Poly(Lactic) Acid Composites for Sustainable Packaging: Biodegradability and Recyclability, Polymers,7,(8), 1476-1496


35. Saidina, D.S., ; Mariatti, M., Julie, M.J.,(2015), Dielectric Properties and Thermal Properties of Calcium Copper Titanate and Barium Titanate Hybrid Fillers Filled Epoxy Thin Filmcomposites for Electronic Packaging Applications, Journal Of Materials Science-Materials In Electronics,26,(8), 6245-6251


36. Chang, B.P., Akil, H.M., Nasir, R.B.M., (2015), Dry Sliding Wear Behaviour of Talc-Reinforced UHMWPE Composite for Implant Application, Sains Malaysiana,44,(6),819-825


37. Tham, W.L, Poh, B.T., Ishak, Z.A.M., Chow, W.S., (2015), Water Absorption Kinetics and Hygrothermal Aging of Poly(lactic acid) Containing Halloysite Nanoclay and Maleated Rubber, Journal Of Polymers And The Environment,23,(2), 242-250


38. Chow, WS., Chang, L.N., Jaafar, M., (2015), Flame Retardant Epoxy Hybrid Composite Laminates Prepared by Vacuum-Assisted Resin Infusion Technique, Journal Of Composite Materials,49,(12), 1471-1481


39. Zamri, M.H., Osman, M.R., Akil, H.M., Ishak, Z.A.M., Shahidan, H.A., (2015), Properties of Pultruded Natural Fiber Reinforced Composites: Effect of Different Kenaf Fiber Yarn Tex, Journal Of Biobased Materials And Bioenergy,9,(2), 128-135


40. A., Kudus, M., Helmi, H.M Akil, M.R Zakaria, M., Saleh, S., Shuhadah, (2015), Synthesis and Characterization of Novel Hybrid MWCNT-Muscovite Composite Filler, Applied Mechanics and Materials, 754,106-109


41. M.R Zakaria, H.M Akil, A., Kudus, M., Helmi, M.Z Ahmad Thirmizir, (2015), Synthesis and Characterization of Hybrid MWCNT-Alumina Filled Epoxy Nanocomposites, Applied Mechanics and Materials, 754,135-139


42. M.F Omar, H .,Jaya, H.M Akil, Z.A Ahmad, N.Z Noriman, (2015), Mechanical Properties of High Density Polyethylene (HDPE)/Sawdust Composites under Wide Range of Strain Rate, Applied Mechanics and Materials, 754,83-88


43. A.A Sinar, Z, Firuz, N, Azni, H.M Akil, H.A Sahrim,(2015), Flexural Performance of Polyurethane/Multi Walled Carbon Nanotubes Foam Composites, Applied Mechanics and Materials, 754,8-12


44. A.A Sinar, Z Firuz, N Azni, A.Z Nur Hidayah, H.M Akil, H.A Sahrim, (2015), Compression Test and Energy Absorption of Polyurethane/Multi Walled Carbon Nanotubes Foam Composites, Materials Science Forum, 819,246-250


45. T.N.A.T Rahim, A.M Abdullah, H.M Akil, D Mohamad, Z.A Rajion,( 2015), Preparation and Characterization Of A Newly Developed Polyamide Composite Utilising An Affordable 3d Printer, Journal of Reinforced Plastics and Composites,


46. T.N.A.T Rahim, HM Akil, AM Abdullah, D Mohamad, ZA Rajion, (2015), Mechanical And Morphological Properties Of Polyamide 12 Composite For Potential Biomedical Implant: Injection Molding And Desktop 3d Printer, Jurnal Teknologi, 76,


47. M.R Zakaria, H.M Akil, M.H.A Kudus, A.H Kadarman,( 2015), Improving Flexural And Dielectric Properties Of Mwcnt/Epoxy Nanocomposites By Introducing Advanced Hybrid Filler System, Composite Structures, 132, 50-64


48. M.F Omar, H Jaya, H.M Akil, Z.A Ahmad, M.F.A Rasyid, N.Z Noriman, (2015), Effect of Organic Modification on Dynamic Compression Properties of Polypropylene/Muscovite Layered Silicate Composites, Materials Science Forum 803,282-287


49. M.F Omar, A Wahab, N Suhaili, H.M Akil, ZA Ahmad, MFA Rasyid,(2015), Effect of Surface Modification on Strain Rate Sensitivity of Polypropylene/Muscozzvite Layered Silicate Composites, Materials Science Forum, 803,343-347


50. M.K Sofiah, O.H Lin, H.M Akil, Z.A.M Ishak,(2015), Effect of Polypropylene-Methyl Polyhedral Oligomeric Silsesquioxane Compatibilizer in Polypropylene/Silica Nanocomposites: Mechanical, Morphological and Thermal Studies, Materials Science Forum 803, 265-268


51. Ishak, Z.A.M.(2015), How Green Are Green Polymer Composites (Any Chance To Define The Level Of 'Greenness'?), Express Polymer Letters,9,(12),1052-1052


52. Razali, MAA., Ismail, H., Ariffin, A., (2015), Graft Copolymerization of Poly DADMAC to Cassava Starch: Evaluation of Process Variables Via Central Composite Design, Industrial Crops And Products,65, 535-545

1. Law, T.T., Phua, Y.J.,Senawi, R.,Hassan, A., Mohd Ishak Z.A.,(2016), Experimental Analysis And Theoretical Modeling of the Mechanical Behavior Of Short Glass Fiber And Short Carbon Fiber Reinforced Polycarbonate Hybrid Composites,Polymer Composites, 37,(4),1238-1248


2. Yusriah, L., Sapuan, S.M., Zainudin, E.S.,Mariatti, M., Jawaid, M,(2016),Thermo-Physical.Thermal Degradation,and Flexural Properties of Betel Nut Husk Fiber Reinforced Vinyl Ester Composites,Polymer Composites, 37,(7),2008-2017


3. Mahmood , H,Moniruzzaman, M., Yusup, S., Akil, H.M., (2016), Pretreatment of Oil Palm Biomass with Ionic Liquids: A New Approach For Fabrication Of Green Composite Board,Journal Of Cleaner Production,126,677-685


4. Samsudin, D., Ismail, H., Othman, N., Hamid, Z.A.A.,,(2016), Rative Study Of Glut Palmitate Salt And Polyethylene Grafted Maleic Anhydride Compatibilizer On The Properties Of Silica Filled High-Density Polyethylene Composites,Polymer Testing,52,104-110


5. Marliana, M.M., Hassan, A., Yuziah, M.Y.N., Khalil, H.P.S.A., Inuwa, I.M., Syakir, M.I., Haafiz, M.K.M.,(2016), Flame Retardancy, Thermal and Mechanical Properties of Kenaf Fiber Reinforced Unsaturated Polyester/PhenolicComposite,Fiber And Polymers,17,(6),902-909


6. Omar, M.F., Akil, H.M., Ahmad, Z.A., Rasyid, M.F.A., Noriman, N.Z., (2016), Effect Of Ion Exchange Treatment On Dynamic Compression Properties Of Polypropylene/Muscovite-Layered Silicate Composites,Journal Of Themoplastic Composite Materials,29,(6),867-889


7. Zulkarnain, M., Husaini, A.B.M., Mariatti, M., Azid, I.A., (2016), Particle Dispersion Model for Predicting the Percolation Threshold of Nano-Silver Composite, Arabian Journal For Science And Engineering,41,(6),2363-2376


8. Khalil, H.P.S.A., Hossain, M.S., Amiranajwa, N.A.S., Fazita, M.R.N., Haafiz, M.K.M., Surya, N.L.M., Dungani, R., Fizree, H.M., (2016), Production and Characterization of the Defatted Oil Palm Shell Nanoparticles, Sains Malaysiana,45,(5),833-839


9. Zamri, M.H., Osman, M.R., Akil, H.M., Shahidan, M.H.A., Ishak, Z.A.M., (2016), Development of Green Pultruded Composites Using Kenaf Fibre: Influence Of Linear Mass Density On Weathering Performance, Journal Of Cleaner Production, 125,320-330


10. Zaaba, N.F., Ismail, H., Jaafar, M., (2016), Recycled polypropylene/peanut shell powder composites: pre-treatment of lignin using alkaline peroxide, Bioresources,11,(2),3524-3537


11. Tajuddin, M., Ahmad, Z., Ismail, .H., (2016), A Review Of Natural Fibers And Processing Operations For The Production Of Binderless Boards, Bioresources,11,(2), 5600-5617


12. Satia, M.S.D., Jaafar , M., (2016), Properties Of Treated Calcium Copper Titanate Filled Epoxy Thin Film Composites For Electronic Applications, Journal Of Applied Polymer Science,133,(16)


13. Johnson, S., Kang, L.P., Akil, H.M., (2016), Mechanical Behavior Of Jute Hybrid Bio-Composites, Composites Part B-Engineering,91,83-93


14. Zakaria, .M.R., Akil, H.M., Kudus, M.H.A., Othman, M.B.H, (2016), Compressive Properties And Thermal Stability Of Hybrid Carbon Nanotube-Alumina Filled Epoxy Nanocomposites, Composites Part B-Engineering,91,235-242


15. Law, T.T., Phua, Y.J., Senawi, R., Hassan A., Ishak, Z.A.M., (2016), Experimental Analysis And Theoretical Modeling Of The Mechanical Behavior Of Short Glass Fiber And Short Carbon Fiber Reinforced Polycarbonate Hybrid Composites, Polymer Composites,37,(4),1238-1248


16. Surya, I., Ismail, H.,(2016),The Effect Of The Addition Of Alkanolamide On Properties Of Carbon Black-Filled Natural Rubber (SMR-L) Compounds Cured Using Various Curing Systems,Polymer Testing,50,276-282


17. Haafiz, M.K., Hassan, A., Khalil, H.P.S.A., Fazita, M.R.N., Islam, M.S., Inuwa, I.M., Marliana, M.M., Hussin, M.H., (2016), Exploring The Effect Of Cellulose Nanowhiskers Isolated From Oil Palm Biomass On Polylactic Acid Properties, International Journal Of Biological Macromolecules,85,370-378


18. Wahab, N.S.A., Omar, M.F., Akil, H.M., Zulkepli, .N.N., Abdullah, M.M.A., Sandu, I., (2016), Static and Dynamic Mechanical Properties of Rice Husk (RH)/Linear Low Density Polyethylene (LLDPE) Composites Under Various Loading Rates, Materiale Plastice,53,(1),42-47


19. Adik, N.N.A.N., Lin, O.H., Akil, H.M., Sandu, A.v., Villagracia, A., Santo, G.N., (2016), Effects of Stearic Acid on Tensile, Morphological and Thermal Analysis of Polypropylene (PP)/Dolomite (Dol) Composites, Materiale Plastice,53,(1),61-64


20. Jaya, H., Omar, M.F., Akil, H.M., Ahmad, Z.A., Zulkepli, N.N., Abdullah, M.M.A., Sandu, I.G., Vizureanu, P., (2016), Effect of Surface Modification on Sawdust Reinforced High Density Polyethylene Composites Under a Wide Range of Strain Rates, Materiale Plastice ,53,(1),85-90


21. Bakhtiar, N.S.A.A., Akil, H.M., Zakaria, M.R., Kudus, M.H.A., Othman, M.B.H.,(2016), New Generation Of Hybrid Filler For Producing Epoxy Nanocomposites With Improved Mechanical Properties, Materials & Design,91,46-52


22. Hani, A.R.A., Hashim, M.S., Lim, T.Y., Mariatti, M., Ahmad, R.,(2016), Impact Behaviour Of Woven Coir-Epoxy Composite: Effects Of Woven Density And Woven Fabric Treatment, Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications,230,(1),240-251


23. Phan, C.H., Mariatti, M., Koh, Y.H.,(2016), Electromagnetic Interference Shielding Performance Of Epoxycomposites Filled With Multiwalled Carbon Nanotubes/Manganese Zinc Ferrite Hybrid Fillers, Journal Of Magnetism And Magnetic Materials,401,472-478


24. Zainuddin, N.L.I., Husseinsyah, S., Hahary, F.N., Ismail, H., (2016), Treatment of Oil Palm Empty Fruit Bunch Regenerated Cellulose Biocomposite Films using Methacrylic Acid, Bioresources,11,(1),873-885


25. Karim, A.F.A., Ismail, H., Ariff, Z.,(2016), Properties and Characterization of Kenaf-Filled Natural Rubber Latex Foam, Bioresources,11,(1),1080-1091


26. Yaacob, N.D., Ismail, H., Ting, S.S., (2016), Soil Burial of Polylactic Acid/Paddy Straw Powder Biocomposite Bioresources,11,(1),1255-1269


27. Poh, C.L., Mariatti, M., Noor, A.F.M., Sidek, O., Chuah, T.P., Chow, S.C., (2016), Dielectric Properties Of Surface Treated Multi-Walled Carbon Nanotube/Epoxy Thin Film Composites, Composites Part B-Engineering,85,50-58


28. Tham, W.L., Poh, B.T., Ishak, Z.A.M., Chow, W.S., (2016), Epoxidized Natural Rubber Toughened Poly(Lactic Acid)/Halloysite Nanocomposites With High Activation Energy Of Water Diffusion,Journal Of Applied Polymer Science,133,(3)


29. Elshereksi, N.W., Mohamed, S.H., Arifin, A., Ishak, Z.A.M., (2016), Evaluation of the Mechanical and Radiopacity Properties of Poly(methyl methacrylate)/Barium Titanate-denture BaseComposites, Polymers & Polymer Composites,24,(5),365-373


30. Ghaleb, Z.A., Mariatti, M., Ariff, Z.M.,(2016), Effect of Amino-functionalized on Tensile and Electrical Properties of Graphene Nanopowder Filled Epoxy Thin Film Nanocomposite, Journal Of Polymer Materials,33,(1),155-164


31. Norshamira, A., Mariatti, M., (2016), Multilayer Graphene Filled Epoxy Thin Film Composites: Transparency, Morphology and Thermal Conductivity, Journal Of Polymer Materials,33,(1),19-181-190


32. Alhareb, A.O., Akil, H.M., Ahmad, A.Z.A., (2016), PMMA Denture Base Composites Reinforced by Nitrile Rubber and Ceramic Fillers, Polymers & Polymer Composites,24,(1),71-79